Saturday, May 10, 2014
Ford Focus PCM Problems
The Ford Focus is a popular passenger sedan. It was introduced to the driving public in the 1999 model year and remains in production as of 2011. Some owners of early Focus models have experienced problems with the powertrain control module.
PCM Defined
A powertrain control module (PCM) is a computer that regulates the emissions, fuel injection and the spark ignition of the engine. The Service Engine Soon" warning light illuminates whenever a fault is detected by the PCM. The fault is assigned a code and stored in the PCM. All contemporary passenger cars have this on-board computer.
2009 Service Bulletin
In August of 2000, Ford issued a technical service bulletin warning of a PCM problem in some of the 2000 Focus models. A defect in the PCM causes the engine not to start after it is cranked. This problem was limited to Focus models equipped with an automatic transmission.
Throttle Response
Calibration of the PCM can affect throttle response. If the PCM is out of calibration, one of the obvious signs is that the engine surges when the accelerator is released. If the diagnostics cannot pinpoint the condition, the PCM may be reprogrammed to the latest calibration.
Wednesday, April 23, 2014
Problems Starting a 1995 Dodge Ram 50
The Dodge Ram is a pick-up truck that started manufacturing in 1981. If you are having problems getting your Dodge Ram to start, there are several things that you can do before you take it to a repair shop. Common issues include fuel, dead batteries, or a bad alternator. You can diagnose the problem yourself without much hassle. You dont have to be a mechanic to accomplish this task. You can do it yourself.
Instructions
- 1
Insert the key in the ignition and turn it over. If you hear a "clicking" noise, you may have a bad alternator. Have the truck towed to a service shop to get the alternator replaced.
2Check the gauge on the dashboard for any indications of low fuel or a dead battery. If the dashboard does not light up at all, you need to check your battery.
3Open the hood to your Dodge ram and use a friends car to jumpstart the engine. Connect the red and black wires from your jumper cables to the red and black terminals on your Ram.
4Connect the other end of the wires to the red and black terminals on your friends battery. Start your friends car and then start your Ram. Allow the Ram to sit for about 10 minutes while running. This will charge the battery.
5Add 1 gallon of fuel to your Dodge Ram if the truck will not jumpstart. Try to start the car again.
Monday, April 21, 2014
Ford Windstar Fueling Problems
Ford Windstar fueling problems have resulted in several recalls on models manufactured between 1995 and 2003. Fuel system defects, including incorrectly manufacturer parts and cracks in the gas tank, can result in potentially dangerous gas leaks. The National Highway Traffic Safety Administration (NHTSA) advises that registered vehicle owners take affected vehicles in for repair to avoid accidents and injuries. Registered vehicle owners should have been notified of recalls via mail by Ford Motor Company.
1999-2003 Models Recalled for UFI Filter Defect
As part of a 58,640 unit recall by UFI Filters USA and NHTSA, certain 1999-2003 model Ford Windstars were recalled in August 2006 due to design defects that could potentially cause fuel spillage and fires. According to NHTSA, the recall only applies to certain defective filters sold under the Purolator brand name "P/N F65277" that were shipped from Jan. 16 through June 2, 2006. Due to the design defect, "the quick connectors might not fully seat with the tube interface, even though the person making the connection may believe that the quick connector is fully attached," the recall notice states. This may lead to dangerous gas leakage problems, which could cause a fire.
2000 Models Recalled for Incorrect Fuel Line End Forms
On June 14, 2000, Ford Motor Company recalled 3,000 Windstar minivans because these vehicles may have incorrect fuel line end forms that could result in a lower than specified pull-apart force for the installed fuel line connection. This problem may result in gas leakage, which could lead to a fire. To remedy the problem, dealers must "install a redundant fuel line clip on the fuel supply and return line connections at the rear of the chassis fuel line bundle," the recall notice states.
1995 Models Recalled for Fuel Tank Cracks
In November 2009, Ford Motor Company recalled 70,116 Windstar minivans manufactured in 1995 due to fuel tank cracking problems in hot-weather states. This particular model can develop fuel tank cracks in the strap area of the standard 20 gallon tank due to "a combination of factors that are present in certain very hot areas of the country." If cracks propagate all the way through the fuel tank, a potentially dangerous gas leak may result. This recall was issued for registered vehicle owners in Alabama, Arizona, Arkansas, Florida, Georgia, Hawaii, Louisiana, Mississippi, Oklahoma, South Carolina, Texas, Nevadas Clark County and 10 southern counties of California.
Thursday, April 10, 2014
How to Troubleshoot Problems With No Fire to the Points on a Massey Ferguson 175
There were only two engines available for the Massey Ferguson 175 over the span of the 11-year production run of this model. Both engines are 4-cylinder motors, one a diesel and the other gasoline powered. Only the latter has an ignition system, naturally. Troubleshooting a breaker point ignition system is a straightforward task, but all components involved must function correctly to deliver voltage where and when its needed.
Instructions
- 1
Set the multi-meter to the voltage scale that registers 0 to 20 volts. Check the voltage at the battery terminals. Charge the battery if the voltage is less than 12.5 volts. Clean the battery cable connections if any corrosion is present.
2Turn the ignition switch to the run position. Measure the voltage at the primary side of the ignition coil. Replace the ignition switch or connecting wires if no voltage is present at the primary terminal of the ignition coil.
3Measure the resistance of the primary ignition coil windings. Turn the ignition switch off and set the multi-meter to the lowest ohm scale. Place the tester leads on both ignition coil terminals. Replace the coil if resistance exceeds 5 ohms.
4Replace the breaker points if they appear corroded or pitted. Replace the condenser, if no faults are found elsewhere. You can test the condenser with the proper equipment, but the cost of a new one is minimal.
Friday, March 28, 2014
General Tire Problems
Tires encounter a number of general problems, so it is important that tires receive proper maintenance for the safety of the driver and drivers of other vehicles on the road.
Tire Inflation
If tires are overinflated, they will wear away in the center because the outer edges are lifted off the ground. Underinflated tires will wear away on the outer edges, as the tire will rise in the middle. Tires will wear evenly when they have the right amount of air pressure.
Shock Abosrbers
Shock absorbers that are not in good condition will cause the tires to become unstable, allowing the tire to continuously move up and down. This can cause abnormal tire wear.
Bent Tire Rims
Car tires should comfortably fit around tire rims. If the rim is out of shape, the tire will function abnormally. Stress on a tire will cause early wear and tear.
Exhaust Valve Problems
Inside a vehicles engine houses a myriad of intricately moving parts to propel the car forward. Parts, such as exhaust valves, play a key role in the functioning of the engines cylinder assemblies.
Function
Exhaust valves work inside the cylinder heads to function with the exhaust port, allowing fumes to leave the chamber. The valve itself runs extremely hot due to the lack of cooling from the hot exhaust fumes.
Identification
Exhaust valve problems arise more often than other valve problems because of the extreme heat, about 1200 to 1350 degrees Fahrenheit. Though it is made of strong alloy material, it can erode from burn-out, creating a hole in the side of the valve.
Considerations
Aside from being burned out, improper replacement of a valve can shorten its life. Additionally, excess deposits on the cylinder and valve can create a hotter environment to allow the erosion process to begin and hasten forward.
Wednesday, March 5, 2014
Problems That a Cars Timing Belt Can Cause
Overhead camshaft engines use a timing belt to maintain a specific synchronization between the crank shaft and the camshaft. The belt turns the camshaft in harmony with the crankshaft to open and close the intake and exhaust valves at just the right time. Most vehicle manufacturers recommend replacing the timing belt as part of the normal maintenance schedule; however, the interval of this maintenance varies between vehicle manufacturers and ranges anywhere from every 65,000 to 100,000 miles .
Valve Timing
The camshaft has a number of lobes that push down on the exhaust or intake valve to let air into or exhaust out of the combustion chamber at just the right time. If the belt has slipped a tooth or broken, the engine will most likely stall as the intake or exhaust valves will no longer open and close at the proper times to let air in or out of the system.
Non-Interference Engines
If the timing belt breaks, the camshaft will cease to move and the valves will be stuck in whatever position they were in when the belt broke. Non-interference engines are designed so that the piston will not be able to contact the valve if the valve remains open when the piston is elevated to its highest position in its bore, so that no major internal damage can result.
Interference Engine
If your vehicle has an interference-style engine, then the camshaft timing is vital. In an interference engine, the intake or exhaust valves extend into the cylinder bore enough so that the piston will slam into the valve if the valve remains open too long. If the timing belt slips or breaks on an interference engine, the cost of repairs can be high, as the repair can involve having to replace the piston or valve.
Preventive Maintenance
To protect yourself from being stranded if the timing belt happens to break or jump a tooth, have the timing belt inspected regularly or become familiar with your vehicles timing belt inspection procedure and do it yourself on a regualr basis. If the engine in your vehicle has an interference engine, it is advisable to have the timing belt checked often and replaced on schedule to prevent the possibility of serious engine damage.
Sunday, January 26, 2014
VW Transmission Problems
Volkswagen and the National Highway Traffic Safety Administration (NHTSA) issued a 2009 recall of 16,000 vehicles due to transmission problems. NHTSA began investigating the issue after hearing reports of power loss in 2009 and 2010 Volkswagen vehicles with DSG automatic transmissions.
Affected Vehicles and Reason for Recall
On August 20, 2009, Volkswagen and the NHTSA recalled Audi A3, Audi TT, Audi TT Roadster, Volkswagen EOS, Volkswagen GTI, Volkswagen Jetta and Volkswagen Jetta Sportwagen vehicles manufactured between September 2008 and August 2009. According to the NHTSA, the wiring harness of a temperature sensor in the vehicles direct shift gearbox could contain insufficiently crimped connector wires.
Risk
The improperly crimped wires could cause a temperature sensor to make a false detection of a high gearbox oil temperature, which could abruptly shift the transmission into neutral. In this case, the selector level position indicator within the instrument panel would flash and the "Depress Brake Pedal" indicator light would come on to tell the driver to brake, potentially causing a crash.
Remedy
Volkswagen notified registered vehicle owners of the recall by mail and, beginning on October 20, 2009, began offering free repairs. The NHTSA ordered dealers to reprogram the transmission control module with updated software free of charge. Concerned vehicle owners may contact the NHTSA or Volkswagen with questions.
Wednesday, January 15, 2014
Ford Electrical Problems
While many Ford vehicles are acclaimed for their affordability, performance and reliability, several of Fords models have become recognized for having electrical problems. The Ford Explorer, Focus and Ranger have a history of electrical system issues.
Ford Explorer
Auto-Facts.org explains that the 1994 through 1996 Explorers have experienced electrical issues that cause the keyless entry system to malfunction. The problem was due to improper electrical grounding that resulted in a faulty connection. Other common Explorer electrical problems include issues with interior lighting, automatic headlights and the malfunction of powered windows.
Ford Focus
On November 6, 2002, Ford Motor Company recalled 291,854 2001 Focus models in response to misrouted electrical connections between the battery and the engine. According to Automotive.com, the potential danger of this defect was that the battery cables might short, which could cause heat-related damage to the cables, making them nonfunctional. The vehicle could then smoke, fail to start or catch fire.
Ford Ranger
According to CarComplaints.com, the 1988 Ford Ranger started off the model series with electrical problems related to the cruise control surging while the vehicle was stalled. Ford Rangers continued to have issues with electrical systems in later models, including the 2007 model for computer problems with the check engine light.
Thursday, December 26, 2013
Headlight Installation Problems
Installation problems with headlights can be a major safety issue because nighttime driving is nearly impossible when headlights are not working properly. Although some headlights can function after well over 1,500 hours of use, even a few minutes of driving without them can be a dangerous venture.
Installation Problems
When installing new headlights, sometimes one or more bulbs will fail to light up. A corroded socket is sometimes to blame for this kind of issue. By applying a cleaner made specifically for electronics, the connection can sometimes be revived. If not, you will likely need a new socket altogether.
Fuse Problems
Voltage issues will also prevent headlights from coming on. Fuses should be checked, and any blown fuse should be replaced. If the new fuse blows as well after replacement, the problem is likely due to a short somewhere in the wiring of the headlights circuit.
Charging Problems
If your headlights lose brightness each time you rev your motor, a problem is likely present somewhere within your vehicles charging system. A faulty alternator is an example of this. Checking your car batterys voltage can help as any voltage reading under 13 volts suggests that the charging system is indeed the problem.
Thursday, December 12, 2013
Chevy S 10 Pickup Tailgate Problems
Some Chevy S-10 pickup trucks have problems with the tailgates. The tailgate cables ensure the tailgate stays at the correct level when it is in the down position. Weak cables may result in personal injury and damage to the truck.
History
The National Highway Traffic Safety Administration completed a defect investigation (EA05008) which details that owners of select Chevy S-10 trucks are authorized to have the cables replaced free of charge. The investigation also recommended that owners of Chevy S-10 trucks periodically inspect the cables for signs of wear and tear.
Warning
Cables that are worn or frayed can break unexpectedly. Moisture interacting with the cable reduces the strength of the cable. When the cable breaks, the tailgate can come down and hit the bumper. This can damage the bumper and tailgate cosmetically. A person may be injured if he is near or on the tailgate when the cable breaks.
Recommendation
Cables that appear to be worn, frayed or bulging should be brought to the attention of General Motors. A trained technician will be able to determine if the cables need to be replaced. Cables may be replaced free of charge if they are included in a warranty, safety notice or recall.
Friday, November 29, 2013
Problems Caused by a Bad Catalytic Converter
A catalytic converter helps to remove certain pollutants from the car exhaust, rather than releasing those pollutants into the air. The catalytic converter sits in the car exhaust system, behind the exhaust headers and before the car muffler. Normally, a catalytic converter will last the life of a vehicle, unless an underlying problem causes it to fail.
Emissions Test Failure
A failed catalytic converter that has not clogged can contribute to an increase in hydrocarbons and carbon monoxide exiting the car tailpipe. Normally, the catalytic converter will reduce the amount of these pollutants to extremely low levels. An increase in these pollutants in the car exhaust can also be caused by a faulty air pump, pulse air system or another component of the car air supply.
Fuel Mileage
A catalytic converter that has plugged up will create excessive back pressure in the car exhaust system. This back pressure increase can affect the car fuel mileage, meaning the car will not be able to drive as far under the same conditions with the same amount of gas. The plugged catalytic converter causes the car to work harder to maintain performance, meaning the car engine will burn more fuel than it would if it had a properly functioning catalytic converter.
Engine Power
A plugged catalytic converter can also reduce the car power at high speeds, such as when the car is driving on the freeway. The driver may notice the car cannot pass other vehicles on the road at freeway speeds as it once did. A driver may also notice that, once the car hits a certain speed, its acceleration becomes sluggish. A plugged converter can also cause the car to idle rough, meaning the engine will sputter or fluctuate in its RPMs. The failed catalytic converter can also cause the car to have trouble starting, causing the engine to stumble or stall upon starting.
Saturday, November 23, 2013
How to Sell a Car That Has Emission Problems
Emission problems can factor heavily into the selling of a car. These problems may prevent a sale in a state where a smog certificate is required. When you are selling a car with emission issues in states that do not require such certification, you can help facilitate a sale by making the necessary adjustments for the market. Use the emission problems to your advantage.
Instructions
- 1
Place a sales ad on a website like Craigslist. In the body of your ad, mention the cars emission problems directly. Include all details related to the emission troubles. If you are aware of the specific cause of the problem, add this information as a suggestion for repair. For example, if a faulty catalytic converter is causing the problem, state that it needs to be replaced.
2Drop your asking price below the Kelley Blue Book value. Say, in your ad, that the emission problems are the reason for the lower price. Market your car as a good deal for any prospective buyers due to the lowered price. Be willing to negotiate. Include a section that cites the benefit purchasing a car with a fixable problem at a very good price--that the buyer could save money. Make sure that this is the case--that the price of the car and the repair are less than the value of the car. Remember that a car with a problem isnt likely to be attractive to buyers unless they can save money.
3Disclose all emission issues to a prospective buyer who contacts you. Go over the information regarding the emission problems once again. He must agree to incur all responsibility regarding the problems. He must be aware of possible smog checks in the future, which he will be completely responsible for.
Tuesday, November 19, 2013
2005 Pontiac G6 Problems
As of 2010, General Motors has issued two recalls on the 2005 Pontiac G6. One addressed a brake problem, while the other corrected owner manual instructions for child safety restraint systems. Intermittent power steering lock-ups and failures, a common problem with this model, have not yet resulted in a safety recall.
Brake Lights
General Motors recalled 8,012 2005 and 2006 Pontiac G6 vehicles to repair a problem with the brake lights. A wiring connector could corrode and cause the brake lights to malfunction, both lighting up when the brake isnt being pressed and not lighting up when the driver is braking. This issue can also affect the cars cruise control, causing the driver to have to apply extra force to brake. If not repaired, this problem could lead to a traffic accident.
Child Restraint Equipment
General Motors recalled 35,777 2005 Pontiac G6 vehicles to correct misprints in the owners manuals that could cause problems with installing child safety seats. The way the erroneous manual instructs the owner to install the child restraint system could cause the safety seat to be installed in a way that could potentially not protect the child in the event of a crash.
Power Steering
Multiple consumer complaints to NHTSA indicate a common intermittent power steering problem in the 2005 Pontiac G6. The power steering may lock up or go out completely on these vehicles, which could lead to a dangerous accident. As of 2010, no recall has been issued to resolve this problem.
Monday, November 11, 2013
Problems Caused by a Bad Alternator
An alternator creates electricity to power an automobile and charge its battery. It is possible to drive with a bad alternator, but this can cause many problems.
Failure to Start
Starting a car requires a good deal of electrical power. At start-up the battery must power the starter, fuel injection system and other components. A battery that is not being properly charged by the alternator will at some point fail to start the vehicle.
Becoming Stranded
While a car will operate for some time on battery power alone, the battery will eventually lose power and the driver may become stranded along the road. Driving at night when more power is needed for headlights, instrument lights, etc., makes becoming stranded more likely.
Belt Breakage
A bad alternator may seize and stop turning. The alternators drive belt with then attempt to turn on an immobile pulley and likely break. When the belt breaks other components driven by the belt will also lose power which may damage the car or make driving difficult.
Friday, November 8, 2013
Manual Transmission Clutch Problems
A properly functioning clutch gives you total control of the gears of a manual transmission. However, when a clutch is acting up, it can be troublesome, especially in busy traffic where the clutch is used often.
Slippage
When the thickness of the clutch disc has decreased due to wear, the pressure plate can not clamp with the same amount of force as usual. This allows pressure to drop causing the clutch to slip. As the clutch continues to slip it gets hotter and hotter causing damage to the flywheel and pressure plate.
Contamination
Oil contamination cause a clutch to fail before it should The source of the oil is mainly from leaks in either the rear crankshaft seal or the input shaft seal. If the clutch experiences jerking once its engaged, then oil contamination is one likely cause.
External
Several external problems can cause clutch chatter problems, such as engine or transmission mounts that have broken. Drive train and chassis components being misaligned can also cause issues with a manual transmissions clutch.
Tuesday, November 5, 2013
Troubleshooting Starter Problems with the VW Passat
The VW Passat is a four-door sedan that comes with a manual or automatic transmission. If your VW Passat will not start properly, it might be a problem with the starter. The starter on your Passat sends an electrical signal from the battery to the engine when the key is engaged in the ignition. You can test the starter with minimal automotive knowledge and little hassle.
Instructions
- 1
Park your VW Passat on a flat surface. Engage the emergency brake to secure the car from rolling. Make a note of the security code for your Passats radio. You can find this in the owners manual.
2Open the hood and use a wrench to disconnect the black cable from the battery on the right side of the engine. Go under the car and check for the engine shield. Use a wrench to remove the shield if your car has one (some models do not use an engine shield).
3Pull the shield out from under the car and locate the starter. The starter is located on the right side of the engines bottom. Disconnect the red cable from the car battery, then connect the red and black leads from your voltmeter to the starters red and black wires going to the battery.
4Look at the instrument display for a reading. If you do not get a 12-volt reading, you either need to replace the starter or the battery. Test the battery terminals with your voltmeter and replace the battery if needed.
Tuesday, October 22, 2013
Pontiac Transport Problems
General Motors, the manufacturer of the Pontiac Transport, has issued multiple safety recalls due to problems that could cause accident or injury to drivers and passengers. Registered vehicle owners may contact the National Highway Traffic Safety Administration to determine if their minivans were recalled.
Steering Problems
General Motors recalled certain 1998 Pontiac Transports due to a manufacturing error that could cause steering difficulty. Drivers could have trouble steering left due to the pinion shaft shifting upward. Authorized dealers will replace lower pinion bearings in the power rack and pinion assembly to remedy this problem.
Door Problems
General Motors recalled certain 1998 and 1999 Pontiac Transports for a sliding door problem that could cause injury. These doors close, but sometimes dont latch. A follow-up recall addressed a problem with the interior handle used to open power sliding doors. These handles could injure a passengers arm if the door is manually opened while the door is also opened by the motor. Dealers will replace the affected latches and handles.
Air Bag Problems
General Motors recalled certain 1999 Pontiac Transports because the drivers side airbag inflation module could produce excess pressure and explode during a crash. Occupants of the vehicle could be injured by flying metal and plastic debris. Authorized dealers will replace the air bag module.
Monday, October 21, 2013
Caravan Alarm Problems
The Caravan, first introduced in 1984, is a popular family style minivan manufactured by the Chrysler Corporation. The Caravan, while known for its safety and reliability, has experienced problems with the its alarm system. Recognizing these alarm issues and knowing how they are corrected may help Caravan owners to avoid costly service fees.
Panic Alarm
A common complain that is reported by Caravan owners is panic alarms that will not shut off on command. To shut off the panic alarm, Dodge instructs the user to press the panic button again or to turn the ignition switch to the on position. When the panic alarm does not turn off after pressing the panic button a second time, often times the culprit is radio frequency noises caused by the alarm system. In order for the alarm system to receive the signal from the panic button instructing it to shut off, it is necessary to stand closer to the vehicle in order for the signal to be read. If after completing these steps the panic alarm does not turn off, it is possible that you have an electrical short in the alarm system, which should be inspected by a Dodge certified mechanic.
Engaging Vehicle Theft Alarm
The vehicle theft alarm system in Dodge Caravans are designed to protect the vehicle from unauthorized entry and operation. When activated, the lights will flash, the horn will honk and the van will not start. A common concern reported by Caravan owners is the inability to engage the vehicle theft alarm. This is often times caused by failure to follow the proper steps. To arm the system, remove the key from the ignition and press the lock button on the keyless entry transmitter. After the last door is closed, the system will automatically arm itself in about 16 seconds. However, if you open a door during this time period, this cancels the signal to turn on the alarm and the alarm will not engage.
Disengaging Theft Alarm
Another common issue reported in regard to the vehicle theft alarm is the inability to disengage. Oftentimes the culprit is a worn keyless entry transmitter that is failing to send the appropriate signal to turn the alarm system off. If after pressing the unlock button on the keyless entry transmitter, the alarm system does not disengage, insert the key and move the ignition switch to the on or start position, which will disarm the system. In this scenario, you may need to have the keyless entry transmitter repaired or replaced in order to prevent problems in the future.
Saturday, October 19, 2013
Jeep Liberty Suspension Problems
As of 2010, Chrysler has issued three separate recalls for Jeep Liberty vehicles due to suspension problems. According to the National Highway Traffic Safety Administration, only 2002-2006 models were affected by these recalls.
Time Frame
On November 4, 2003, Chrysler recalled 336,000 model year 2002-2003 Jeep Liberties. On August 1, 2006, 826,687 more Jeeps were recalled including model years ranging from 2002-2006. The most recent recall, on April 7, 2009, involved 43,489 additional 2002-2003 Liberty Jeeps.
Defect and Risk
A loss of lubrication to the lower control arm ball joints could lead to potentially dangerous levels of wear. Corrosion may cause the steering knuckle to separate. If the ball joint separates from the knuckle, the driver could lose control of the vehicle. This could cause a crash.
Remedy
Authorized dealers were instructed to inspect and replace the ball joint assemblies on these vehicles and, in some cases, install new heat shields to protect these Jeeps from damage. Concerned Jeep Liberty owners may contact NHTSA or Chrysler to determine whether their vehicles may have been part of these recalls.