Wednesday, May 21, 2014
How to Replace the Passenger Mirror in a Dodge Ram
The Dodge Ram pickup truck was introduced in 1981 and quickly became the most successful pickup truck in the Dodge lineup. Dodge manufactures the Ram on either a van platform or a truck platform. Both versions utilize the same side view mirrors, so the replacement process is the same.
Instructions
- 1
Press the left side of the passenger mirror into the mirror shell of the Dodge Ram. By pushing the left side of the mirror into the shell, the right side of the mirror is forced out of the shell. This allows you to grasp the mirror with your hand.
2Place your fingers on the backside of the Rams mirror and press your thumb against the front side of the mirror. Pull out on the mirror to separate the mounting brackets from the ball-joint located inside the mirror shell.
3Place the new mirror into the shell and press on the center of the mirror with your fist to push the mounting brackets around the ball-joint.
4Adjust your new mirror to meet your driving needs.
Wednesday, April 23, 2014
Problems Starting a 1995 Dodge Ram 50
The Dodge Ram is a pick-up truck that started manufacturing in 1981. If you are having problems getting your Dodge Ram to start, there are several things that you can do before you take it to a repair shop. Common issues include fuel, dead batteries, or a bad alternator. You can diagnose the problem yourself without much hassle. You dont have to be a mechanic to accomplish this task. You can do it yourself.
Instructions
- 1
Insert the key in the ignition and turn it over. If you hear a "clicking" noise, you may have a bad alternator. Have the truck towed to a service shop to get the alternator replaced.
2Check the gauge on the dashboard for any indications of low fuel or a dead battery. If the dashboard does not light up at all, you need to check your battery.
3Open the hood to your Dodge ram and use a friends car to jumpstart the engine. Connect the red and black wires from your jumper cables to the red and black terminals on your Ram.
4Connect the other end of the wires to the red and black terminals on your friends battery. Start your friends car and then start your Ram. Allow the Ram to sit for about 10 minutes while running. This will charge the battery.
5Add 1 gallon of fuel to your Dodge Ram if the truck will not jumpstart. Try to start the car again.
Wednesday, October 9, 2013
How to Locate a PVC Valve in a 2006 RAM 1500
The PCV valve is one the most important aspects of the emissions control system. The valve recirculates unburned gases and fresh air into the crankcase, allowing for cleaner burning of the fuel. The PCV valve is a simple plastic valve that flexes with the pressure of the engine, allowing for more or less unburned gases to pass through. The 2006 Ram 1500 followed similar designs with the placement and operation of the PCV valve. You should check the valve every 30,000 miles, and replace it, as necessary.
Instructions
- 1
Trace the air filter tubing. The PCV valve connects to this, remotely, through black tubes.
2Trace the black vacuum tubes to the PCV valve. The tubing may route through the brake booster on some models.
3Pull the tube off of the PCV valve, to verify you have located it properly. The 3.7L and 4.7L PCV valves mount directly onto the oil fill spout. The 5.7L places the PCV valve directly on the intake, behind the throttle body. The PCV valve is a basic plastic component about two inches in length. Some are L-shaped.