Repair And Fix it

In the intrusion alarm in your four-door Mondeo is used to deter auto-theft. However, disconnecting it from the battery can disable the intrusion alarm. The car alarm is wired into the negative terminal connected to your Mondeos battery. You dont have to be a car mechanic to disconnect your battery terminal. You can easily perform this task with a few tools found around your home. After the terminal is disconnected you will not have to worry about your alarm going off.

Instructions

1

Pop the hood to the Mondeo and locate the battery to the right side of the engine.

2

Look for the negative terminal labeled with "-".

3

Loosen the negative terminal with a socket wrench.

4

Disconnect the negative terminal from the Mondeos battery.

The Caravan, first introduced in 1984, is a popular family style minivan manufactured by the Chrysler Corporation. The Caravan, while known for its safety and reliability, has experienced problems with the its alarm system. Recognizing these alarm issues and knowing how they are corrected may help Caravan owners to avoid costly service fees.

Panic Alarm

A common complain that is reported by Caravan owners is panic alarms that will not shut off on command. To shut off the panic alarm, Dodge instructs the user to press the panic button again or to turn the ignition switch to the on position. When the panic alarm does not turn off after pressing the panic button a second time, often times the culprit is radio frequency noises caused by the alarm system. In order for the alarm system to receive the signal from the panic button instructing it to shut off, it is necessary to stand closer to the vehicle in order for the signal to be read. If after completing these steps the panic alarm does not turn off, it is possible that you have an electrical short in the alarm system, which should be inspected by a Dodge certified mechanic.

Engaging Vehicle Theft Alarm

The vehicle theft alarm system in Dodge Caravans are designed to protect the vehicle from unauthorized entry and operation. When activated, the lights will flash, the horn will honk and the van will not start. A common concern reported by Caravan owners is the inability to engage the vehicle theft alarm. This is often times caused by failure to follow the proper steps. To arm the system, remove the key from the ignition and press the lock button on the keyless entry transmitter. After the last door is closed, the system will automatically arm itself in about 16 seconds. However, if you open a door during this time period, this cancels the signal to turn on the alarm and the alarm will not engage.

Disengaging Theft Alarm

Another common issue reported in regard to the vehicle theft alarm is the inability to disengage. Oftentimes the culprit is a worn keyless entry transmitter that is failing to send the appropriate signal to turn the alarm system off. If after pressing the unlock button on the keyless entry transmitter, the alarm system does not disengage, insert the key and move the ignition switch to the on or start position, which will disarm the system. In this scenario, you may need to have the keyless entry transmitter repaired or replaced in order to prevent problems in the future.

The alarm on your 1994 Chrysler Concorde can go off even during routine maintenance, such as changing a tire. If you need to make a repair to your Concorde, you can disconnect the car alarm from the cars battery. This will disable the alarm and prevent it from sounding while youre working. You dont have to be a mechanic to perform this task. You can do it yourself with little knowledge of the subject.

Instructions

1

Open the hood to gain access to the battery.

2

Locate the negative terminal of the battery, which has a "-" mark on it.

3

Use a pair of channel locks to loosen the connection to the battery.

4

Remove the terminal from the battery to disable the alarms power supply.

Car alarms occasionally malfunction, annoying their owners and others in the vicinity. Its useful to know how to disable the alarm rather than to have to call and wait for a mechanic or alarm specialist.

Car alarm circuits vary but generally toggle switches that disconnect the alarms are installed on dashboards or nearby. Many alarms allow you to disable them with remotes. Malfunctioning alarms might just need new batteries. A broken wire also might be the culprit. If these are not solutions, then it is probably time to work manually on your car alarm.

Instructions

Disconnecting Your Alarm

1

Open the hood of your car. Find the line connected to your cars battery that runs to the alarm system. Disconnect it from the battery. It typically has a fuse attached close to the positive battery post. This will disable the alarm and allow you to work freely without the alarm sounding while you are trying to disconnect it.

2

Unplug all of the switches in the "brain box," which is typically black and installed under the dashboard near the steering wheel. All of the circuits are linked there, including the alarm wires and relays.

3

Unplug the two wires attached to the ignition system. These wires are under the steering column and run up to the back of the ignition switch. Be careful not to disconnect the actual ignition wires for the car; you are disabling only the wires that run from the brain box to the ignition. They generally are more fragile-looking than the stock wiring.