Pages

Friday, February 21, 2014

How to Read Trouble Codes on a 1994 Toyota 4 Runner

How to Read Trouble Codes on a 1994 Toyota 4-Runner

You can read the trouble codes on your 94 Toyota 4-Runner from your home garage using a computerized handheld device known as an OBD scan tool. This tool can be purchased from your local auto parts retailer. The 4-Runner comes standard with an on-board diagnostics computer (OBD) that receives and stores trouble codes sent to it from sensors positioned throughout the vehicle. These sensors monitor all functions of the vehicle. Once these codes have been detected, the OBD computer illuminates a service or warning light on your instrument panel. You can read the codes yourself so you can pinpoint exactly what repairs need to be done.

Instructions

    1

    Find the OBD access port just left of the fuse panel cover on the drivers side dashboard. Plug the scan tool into this port, but do not force it in. If you force it, the pins could bend.

    2

    Put the key into the ignition and turn it to the "On" position, but do not crank the engine. This will power on most OBD scan tools. Note that scan tools vary depending on the manufacturer. Check your scan tools manual for exact instructions.

    3

    Wait for the scan tool to display "OK." Turn off the vehicle.

    4

    Press the "Menu" key on your scan tool and scroll through the menu using the arrow keys. Look for the "Stored Codes" option. Select this option. Wait while the scan tool displays the numerical trouble codes. Some scan tools will also display the diagnosis on the display, while others require that you look up the codes in the booklet that came with the scan tool.

    5

    Unplug the scan tool and have your vehicle repaired by a qualified mechanic.

ReadMore

How to Check the Coolant for the 2002 Lexus LS430

How to Check the Coolant for the 2002 Lexus LS430

The 2002 Lexus LS430 came with a 4.3 liter V-8 engine that produced 290 horsepower at 5,600 r.p.m. The fuel economy EPA highway mileage on the 2002 LS430 was 23 m.p.g. and 16 m.p.g. city mileage. The 4.3 liter engine is capable of creating 320 foot-pounds of torque. Checking the coolant on your 4.3 liter LS430 will keep the engine cooled to its proper level and maintain the life of the engine.

Instructions

    1

    Open the hood of your LS430. Stand in the front of the vehicle facing the radiator.

    2

    Place your hand on the radiator cap momentarily to see if it is hot to the touch. If the radiator cap is hot, do not open it or attempt to break the seal to depressurize the radiator.

    3

    Remove the radiator cap once you have verified that the engine is cool, or the car has sat without running for over one hour.

    4

    Visually inspect the fill hole at the top of the radiator. If you can see the metal fins inside the radiator, and you dont see any coolant, then you need to add some.

ReadMore

Thursday, February 20, 2014

Heavy Duty King Pin Bushing Tools

Heavy Duty King Pin Bushing Tools

King pins and bushings are vital steering system parts on large trucks. Regular maintenance and inspection is recommended to ensure safety of the vehicle. If replacement is required, some king pin bushing models require special tools. Tools commonly used for king pin bushing removal and replacement include a press, soft brass drift punch, and a reamer.

Hydraulic Press

    A hydraulic press is often used in the removal of a king pin bushing due to the extreme difficulty that can be experienced while attempting to remove the king pin. Removal of the king pin without one is nearly impossible in large trucks like semis and buses. Using a press eliminates the need for sledgehammers and torches, and the hydraulic pressure removes the king pin with little effort. Press tool kits are also available for king pin bushings. Press tool kits are used by inserting the compression nut into a ratchet.

Soft Brass Drift Punch

    A soft brass drift punch can be used in place of a hydraulic press to remove the king pin bushing. Generally, it is recommended that an air hammer be used when removing a king pin bushing with a soft brass drift punch, which will make the removal of the king pin easier. The use of a sledgehammer or traditional hammer can take a lot of strength and effort, especially on a large truck. Soft brass drift punches are the best alternative to a hydraulic press because they will not spark or damage other metal parts.

Reamer

    Reamers are not used in the replacement of all king pin bushings. Half-ton and three-quarter-ton trucks use what is called a "floating" bushing, recognizable by their bronze color. Floating bushings do not require reaming because they are manufactured to the final size. One-and-one-half-ton trucks do require the bushings to be reamed, because the bushings are press-fit into the spindle. For these types of king pin bushings, a reamer is required. When reaming is required, it is important to avoid honing or burnishing the king pin bushings, which will cause damage to the bushings. Reaming is done with the use of an adjustable straight flute reamer to ensure that no parts are damaged. To use the reamer, it is inserted into the steering knuckle just until the blades touch the bushing. It is then rotated with a slight downward pressure. Applying too much press can also cause damage to the king pin. Driving with a damaged king pin is extremely dangerous, and can cause a loss of control to the vehicle, possibly resulting in an accident.

ReadMore

Parts of Power Steering

Power steering ers to steering assisted by a hydraulic pump, a pulley belt controlled by engine speed, a rotary valve device and steering gears. There are two types of power steering: rack-and-pinion steering and the recirculating-ball steering.

Steering Wheel

    The steering wheel is a wheel controlled by the driver of the vehicle. When the driver turns the steering wheel, the wheels of the vehicle turn. The steering wheel is the user-controlled part of a power-steering system.

Rotary Valve

    A rotary valve is a device that senses the forces applied on a steering wheel. It is part of a spool valve assembly. The rotary valve has a torsion bar. Force applied to a torsion bar causes it to twist and rotate the inside of the spool valve. The top of the torsion bar in the rotary valve connects to the steering wheel. Depending on the steering system, the bottom of the torsion bar connects to the worm gear or the pinion, which turns the wheels. When the spool valve turns, a port opens and allows steering fluid to flow to the appropriate lines. The lines connect to the power cylinder.

Rotary Vane Pump and Pulley

    A rotary vane pump provides the hydraulic power for the power steering. The cars engine along with a belt and pulley run the pump. Retractable vanes inside a chamber of the pump spin and force hydraulic fluid to the outlet for the rotary valve. The pump runs faster when the engine is running faster. Higher engine speeds create higher pressure on the fluid flowing to the outlet. The pump also has a pressure-relief valve that opens if there is too much fluid pumping, such as with high engine speeds.

Steering Gear: Rack and Pinion

    The steering gear turns the wheels. In a rack-and-pinion steering system, the pressurized fluid pushes on the power cylinder mounted on the rack. The resulting changes in pressure from the fluid moves the rack, making steering easier. The rack is a long metal piece with a flat side. On the flat side there are teeth cut into the edges. A steering shaft connects the steering wheel with the rack. A pinion gear on the end of the shaft connects with the teeth of the rack. On each end of the rack is a tie rod, which connects to the spindle of the wheels.

Steering Gear: Recirculating Ball

    In a recirculating-ball system, steel balls roll between the steering shaft and the rack piston. With assistance from the hydraulic system, the rack piston moves up or down on a worm gear to turn the wheels.

Return Line

    The return line directs the fluid from the power cylinder back to a reservoir on the pump.

ReadMore

Wednesday, February 19, 2014

1992 Dodge Colt Troubleshooting No Spark

1992 Dodge Colt Troubleshooting No Spark

The 1992 Dodge Colt is a two-door hatchback. If you are having problems with your 92 Dodge Colt, there are a few things you can do before you have a mechanic take a look at it. The spark plug on the engine is what sparks it to life. If you have a bad spark plug, you will need to replace it in order for the engine to fire.

Instructions

    1

    Turn off the Dodge Colt and pop the hood.

    2

    Locate the spark plug housing on the back of the engine. The spark plug housing is labeled for easy access.

    3

    Pull the spark plug from the housing with your fingers.

    4

    Touch the spark plug to your Dodge Colt to look for a spark. If the spark is blue, you need to replace the spark plug.

    5

    Pull the spark plug from the housing and replace it with a new one. Put the spark plug housing back into the engine and then start the car.

ReadMore

Instructions for an Air Bumper Jack

A bumper jack raises a vehicle in either the front or rear to gain access to the parts underneath for repairs. An air bumper jack is a bottle design that uses air pressure to raise and lower the jack. In the manual mode, you pump the handle up and down to add air pressure inside the jack and extend the saddle upwards to raise it. An air compressor connects to the bottle jack to use for raising the jack automatically instead of pumping the handle up and down.

Instructions

    1

    Park the vehicle on a flat surface and engage the emergency brake. Place a wheel chock or brick in front of each front wheel if you are jacking the back up. Place a wheel chock or brick behind each rear wheel if you are jacking up the front of a vehicle.

    2

    Insert one of the two handle pieces that are smooth on both ends into the other. Press the spring pin in one, insert the other and align the pin with the hole in the second piece. The pin will pop out and hold it in position in the hole in the handle. Attach the third handle piece to the bottom of the first two pieces in the same manner. The bottom handle piece has a U-shaped fitting on the bottom end.

    3

    Insert the bottom of the handle into the release valve on the bottom of the air bottle jack. Turn the handle clockwise as far as it will turn to close the release valve.

    4

    Turn on an air compressor and let it power up until it cycles off. Attach the air compressor hose to the air compressor by pulling the quick connector ring back, inserting it onto the fitting and releasing the quick connector. Attach the other end of the air compressor hose on the air control valve on the front side of the bottle jack in the same manner.

    5

    Push the bottle jack with the handle to position it under the vehicle bumper where it attached to the frame while allowing access to the air control valve. The air control valve is above the air compressor hose fitting on the jack. Place a piece of wood or two-by-four board on the round saddle of the bottle jack top.

    6

    Grasp and squeeze the air control valve to add air to the jack and raise the saddle under the vehicle. Release the air control valve when the vehicle is high enough off the ground.

    7

    Place a jack stand under the vehicle to support it. Turn the jack handle counterclockwise in the release valve slowly to lower the jack. Pull the jack out from under the vehicle.

ReadMore

Tuesday, February 18, 2014

How to Change an A6 Injector

The fuel injectors for an Audi A6 deliver fuel to the engines cylinders in a specific sequence, allowing the vehicle to to be more responsive than its carburetted counterparts. The procedure for changing the fuel injectors is generally the same for all A6s.

Instructions

    1

    Turn off the ignition. Remove the fuse for the fuel pump, using the list on the fuse box as a guide. Start the engine and allow it to idle until it stalls. Turn the ignition off and disconnect the negative battery cable with a socket wrench. Replace the fuel pump fuse.

    2

    Wrap a clean shop rag around one of the fuel-line connections to the fuel rail. Loosen the retaining nuts for the fuel line with a socket wrench to relieve the pressure in the fuel tank. Properly dispose of the rag.

    3

    Remove the retaining nuts for the fuel lines, and detach the fuel lines from the fuel rail. Disconnect the mounting bolts for the fuel rail with a socket wrench, and remove the fuel rail from the intake manifold with the injectors still attached. Turn the fuel injectors counterclockwise to remove them from the fuel rail.

    4

    Mount a new lower gasket to the nozzle end of the fuel injectors. Clean the threads of the fuel injectors with a clean shop rag, and apply a thin layer of thread-lock compound to the threads. Screw the fuel injectors clockwise with a socket wrench to install them into the fuel rail, and mount a new upper gasket to the open end of the fuel injectors.

    5

    Mount the fuel rail to the intake manifold, and fasten the mounting bolts with a socket wrench. Connect the fuel lines to the fuel rail, and fasten the retaining nuts for the fuel lines. Reattach the cable for the negative battery terminal.

ReadMore