Sunday, May 18, 2014
Brake Piston Tools
Brake pistons, or caliper pistons, are the part of the caliper that physically pushes the brake pads against the rotor when the brake pedal is pressed. This piston must be pressed into the caliper when replacing brake pads to make clearance for the new pads. There are several different tools used to press this piston in, depending on the style of piston system used: no push-back, dual pistons or standard.
C-Clamp
The C-clamp is one or the more basic tools and the most common tool used on caliper pistons. This tool has a fixed side that is placed on the caliper body and a screw side that is placed on the piston. The user tightens the screw side of the clamp and it slowly presses the piston into the caliper. This tool is used on a standard piston system, which is what a vast majority of vehicles use on the front brake system.
Dual Piston Press
The dual piston press is used on vehicles that have a dual piston system. Typically, these systems are reserved for high-performance vehicles. This tool has two plates, they are placed in the caliper just like brake pads. The user then tightens a wing-style nut that spreads the two plates, thereby compressing the pistons. If the user attempts to compress only one piston at a time, on a dual piston system, the opposite piston will raise as the other is compressed. This tool can typically be rented from any parts store.
Piston Cube
The piston cube is by far the most basic of the tools used. To better understand how this tool is used, one must understand how a "no push-back" calipers function. This style of caliper has a threaded piston that turns and locks into place when the parking brake is engaged. This piston can only be compressed by twisting and pushing at the same time. This tool is a hollow cube that is attached to a ratchet. This cube has small pegs that are inserted into grooves on the piston so it can be turned. Each side of the cube has different peg styles and sizes for different vehicles. This tool is primarily used on rear caliper pistons.
Piston Tool Set
The piston tool set is by far the most versatile ---and expensive--- tool for brake caliper pistons. This tool combines all of the others into one. It has a plate that acts as the outer brake pad, a screwing clamp to press the piston and a series of interchangeable plates that attach to the press to match all styles of pistons. This tool can be used on nearly any style of brake caliper piston. As stated before, this tool kit it rather expensive, but most parts stores lend them for free with purchase.
Wednesday, May 14, 2014
Antique Auto Body Tools
Antique auto body tools recount the early days of car manufacturing. Henry Ford, the great industrial giant, according to Eye Witness to History, was an example of early 20th-century entrepreneurs who made automobiles affordable for the average working person. The Ford Company established factories with assembly lines of workmen who manufactured cars on a daily basis. Many of the tools these early workers used to construct and repair automobiles are now modernized and remain in use today.
Deluxe Tool Box
The deluxe tool box was initially designed for the 1928 and 1929 Model A Ford, according to Snyders Antique Auto. This tool box mounted under the radiator, between the front fenders. The deluxe box is situated best when the radiator apron is removed. Its locking lid is ribbed and is curved identically to the shape of the fenders. This box was an accessory and when it was installed it would block the crank hole.
Basic Tool Kits
Basic Model A and Model T Ford auto body tools kits included an array of gadgets, many of which were modernized and still used today. Tire irons were usually unpainted and stretched 10 inches long for maximum gripping, according to Model T Restore. Oiling cans were common as were wheel jacks, air pumps and adjustable wrenches. Antique pliers often included a screwdriver blade attached at the bottom of the handle. The heads of pliers opened a maximum of 1 1/4 inches. All pliers were branded with the Ford insignia and remained unpainted.
Accessory Tools
Grease guns were plated with solid nickel and gasoline sticks were fashioned long and lean for easy measurements. Antique tire gauges were attached with iron hexagon bolts. Once tightened, air pressure would trigger the needle in a handheld gauge, which would display the reading. According to ValveLock, Balloon Standard Tire pressure gauges read pressures from 0 to 80 psi.
Sunday, May 4, 2014
Hayden Transmission Tools
Hayden is a company that has produced transmission parts and tools for many years. The company deals with heavy-load transmissions primarily, rather than lighter transmissions such as the ones used in passenger cars. The transmissions this company caters to are more likely to be found in small buses or hauling trucks.
Miscellanous Tools
Hayden produced a line of general tools that were necessary for transmission work in prior years. Many of these tools can still be found second-hand in good condition. Wrenches, hammers and air-powered impact wrenches were among the most produced of this line. These were discontinued approximately eight years ago due to the company downsizing, though these items can sometimes be purchased in small orders for large companies. Many of these tools come pre-packaged in kits used to repair parts of the transmission.
Specific Tools
Hayden makes a various tools for very specific jobs during the repair of a transmission. The HAYT0171 is a foot press that comes with several different attachments to allow it to be used with both older and newer models of transmission. This is a manual tool that requires a good deal of strength to use. The HAYT0158SP is a clutch spring compressor, for replacing the clutch spring in the transmission. When removed, the clutch spring in a manual transmission extends fully which makes it impossible to force back into the transmission. This compressor forces the spring to recoil and allows a mechanic to replace the spring, or install a new one. The HAYT0033 is a universal pump puller. This allows the mechanic an easier way to pull out the transmission fluid pump for the transmission, as well as hold its replacement steady upon installing it. The term "universal" means that it will fit any model of transmission, no matter what make the vehicle being worked on happens to be.
Kits
Dozens of kits are available for everything from rotors to transmission fluid coolers. These kits come with an assortment of tools and parts to fully fix the problem with the transmission. A bare part, which only includes the part, can be purchased separately from the kit, if necessary. Kits that come with all screws, bolts, wrenches, sockets and other necessary pieces, as well as the part, cost nearly the same price from the Hayden manufacturer. The only kit that is no longer being made by Hayden, but is still sold under the Hayden name, is the transmission gasket-replacement kit.
Sunday, April 20, 2014
Snap on Wrench Automotive Tools
Snap-on Tools has long been an understood mainstay supplier of professional mechanic garages, given the companys wide array of tool choices. From hundreds of hand tools to pneumatic and automated ones, the company consistently produces a quality product. This is important since much of the work mechanics perform regularly would break home tools quickly. Manufactured for significant harder work pressure than normally expected with consumer grade tools, Snap-on instruments for automotive work have been available for 90 years, with ratchets, sockets, wrenches and screwdrivers making up the basic bread-and-butter of the choices.
History
Snap-on automotive tools, along with its general product line, first came on the market in the early 1920s. The initial product line focused on basic wrenches with interchangeable sockets. Prior to this time, tools did not have such flexibility, and what you bought only worked in terms of one function and one size. As a result, a mechanic typically needed a lot of molded tools for different work sizes. Using the door-to-door salesman approach, Snap-on was an early innovater visiting mechanic shops and showing their tool product value on the floor. This immediatey created a growing boom driven by eager customers.
Todays Automotive Tools
Snap-on tools today still delivers via a stocked dealer van just the way they were beginning in the 1950s. Again, the emphasis is on instant proof of the tools value on the shop floor. Tools today include hand versions, diagnostic measurement units, and power or automated tools (electric and pneumatic). Snap-on has also branched out its tool line into software and vehicle repair database management.
Hand Tools
The hand tools still resemble the basic categories of the 1920s: screwdrivers, wrenches and sockets. In addition, Snap-on also provides a wide line of automotive-specific tools such as specialty tools, punch and chisels, specialized hammers, big and small crowbars, and plenty of versions of pliers for a wide range of jobs. For engine work, Snap-on provides a wide line of bearing and oil seal installation and removal sets, piston work tools, bushing and suspension-specific tools, and specialty lathes and cutting tools for fabrication.
Power Tools
Snap-on power tools come in two categories: electric and pneumatic. These units tend to be for heavy duty work and high-powered applications. The selection includes impact wrenches, air drills, pneumatic ratchets, hammer tools and many types of fabrication tools (grinders, cutters, polishing, and hammering).
Automotive Tool Storage
With the wide array of tools to choose from, mechanics will quickly find a need for storage to make sure tools are secure and dont get lost. Snap-ons selections provide for storage units ranging from rolling drawers to full-size closet storage, all being lockable as needed. More importantly, the storage units are stronger than retail grade, so they dont buckle under the tool weight.
Saturday, April 19, 2014
Exhaust Pipe Flaring Tools
Pipe flaring tools are a necessity to help you replace or repair an exhaust pipe. Most inexpensive exhaust pipe flaring tools are able to round out the end of the pipe, but a high-end tool will move the metal to make the opening larger. To make the change more dramatic, you can heat the pipe before flaring to make the metal more pliable.
Superior Tool Pro Pipe Flaring Tool
The Superior Tool Pro Pipe Flaring Tool is used to flare brass, soft copper and aluminum tubing in all standard sizes ranging from 3/16 to 5/8 inches. It has a self-centering yoke inclined at 45 degrees that is made of resilient, malleable steel
Lisle Flaring Tool Set
The Lisle Flaring Tool Set includes strut and tail-pipe cutoff tools that can cut both round and out-of-round pipes. You can use one hand to operate the four knife-edged wheel. A specialized design lets this tool shift so that it can make out-of-round cuts as well as cut an entire pipe with a one-third turn.
Great Neck Saw Pipe Flaring Tool
The Great Neck Saw Pipe Flaring Tool can produce a single flare on tubing with no possibility of crushing. It can make a smooth flare on all standard high pressure fittings, including sizes 3/16 to 5/8 inches.
Bend Pak Blue Bullet Heavy Duty Pipe Bender
The Bend Pak Blue Bullet Heavy Duty Pipe Bender is a solid steel, electric machine that can be used for all necessary flaring and expanding with a maximum capacity of 3 inches. It also features a degree plate for easy viewing, an internal expander and a high speed clamp-less swager.
RIDGID Model 345 Flaring Tool 45 Degrees
The RIDGID Model 345 Flaring Tool 45 Degrees can flare brass, aluminum, soft copper and mild steel tubing in seven sizes ranging from 3/16 to 5/8 inches. Its center yoke is inclined to a 45 degree angle.
Superior Tool Company Papco Style Flaring Tool
The Superior Tool Company Papco Style Flaring Tool is a small, hand-held tool that can produce 45 degree flares on aluminum, copper, brass, and thin wall tubing in sizes ranging form 3/16 to 5/8 inches.
Thursday, February 20, 2014
Heavy Duty King Pin Bushing Tools
King pins and bushings are vital steering system parts on large trucks. Regular maintenance and inspection is recommended to ensure safety of the vehicle. If replacement is required, some king pin bushing models require special tools. Tools commonly used for king pin bushing removal and replacement include a press, soft brass drift punch, and a reamer.
Hydraulic Press
A hydraulic press is often used in the removal of a king pin bushing due to the extreme difficulty that can be experienced while attempting to remove the king pin. Removal of the king pin without one is nearly impossible in large trucks like semis and buses. Using a press eliminates the need for sledgehammers and torches, and the hydraulic pressure removes the king pin with little effort. Press tool kits are also available for king pin bushings. Press tool kits are used by inserting the compression nut into a ratchet.
Soft Brass Drift Punch
A soft brass drift punch can be used in place of a hydraulic press to remove the king pin bushing. Generally, it is recommended that an air hammer be used when removing a king pin bushing with a soft brass drift punch, which will make the removal of the king pin easier. The use of a sledgehammer or traditional hammer can take a lot of strength and effort, especially on a large truck. Soft brass drift punches are the best alternative to a hydraulic press because they will not spark or damage other metal parts.
Reamer
Reamers are not used in the replacement of all king pin bushings. Half-ton and three-quarter-ton trucks use what is called a "floating" bushing, recognizable by their bronze color. Floating bushings do not require reaming because they are manufactured to the final size. One-and-one-half-ton trucks do require the bushings to be reamed, because the bushings are press-fit into the spindle. For these types of king pin bushings, a reamer is required. When reaming is required, it is important to avoid honing or burnishing the king pin bushings, which will cause damage to the bushings. Reaming is done with the use of an adjustable straight flute reamer to ensure that no parts are damaged. To use the reamer, it is inserted into the steering knuckle just until the blades touch the bushing. It is then rotated with a slight downward pressure. Applying too much press can also cause damage to the king pin. Driving with a damaged king pin is extremely dangerous, and can cause a loss of control to the vehicle, possibly resulting in an accident.
Friday, January 31, 2014
Portable Wheel Alignment Tools
Wheel alignment is one of the important tasks undertaken during vehicle maintenance. It is the relationship of the automobile wheels to the vehicle itself, to each other and to the road. The main purposes of conducting wheel alignment is to ensure the vehicle is stable on the road, to reduce the amount of wear on tires and to produce the least amount of moving resistance. Incorrect wheel alignment can be very dangerous because it can seriously affect handling and vehicle safety. Wheel alignment mainly involves three major measurement angles: the caster, the camber and the toe.
EZ Line Laser Wheel Alignment Tool
The EZ Line laser is a tool kit used for aligning different systems such as wheels and axles of vehicles such as heavy-duty trucks and trailers. One of its main advantages is that it is compatible with vehicles that use toe settings. This tool kit comes with magnets which are attached directly on the vehicle system, a 32-inch measuring tape and two magnetic fifth-wheel pin adapters. It has the ability to capture measurements in less than ten minutes. If the laser goes through the center of the magnet when shot, then the automobile system wheels are properly aligned. If not, the same lasers are used to align the wheels properly.
Camber Caster Gauge
A camber caster gauge is a small, portable device that is attached at the end of the axle on a wheeled vehicle in order to zero out the measurement dials. It captures measurements of the camber and the caster of a wheeled vehicle. Camber ers to the tip of the tire and wheel while caster is the angle of tilt of the kingpin. When the caster is tipped toward the center of the kart, the measurements are considered positive; toward the front of the kart, the measurements are negative. As for the camber, if the kart is tipped toward the center, the measurements are considered negative. If it is to the outside, the measurements are positive.
Laser Wheel Alignment Gauge
The laser wheel alignment gauge is a battery-operated and portable device which is easy to use and calibrate. It has the capability of taking fast measurements from automobiles and has a calculator for converting measurements. It produces measurements of the combined toe angle with high precision. It constitutes the laser, laser target plate and a mirror. This gauge produces clear laser lines which ensure fast and accurate readings.
Friday, January 24, 2014
Camshaft Locking Tools
The camshaft is a shaft that holds the cam, the cam being a device that converts linear motion in to rotary motion and vice versa. If you are looking to change your timing or cam belt, or access a system near the camshaft, then you need a camshaft locking tool to hold it in place. Camshaft tools are vehicle-specific, so you need to ensure that you are purchasing the correct tool for the make and model of your vehicle.
BMW
The S85 Camshaft Alignment Tool Kit comes with a camshaft lock, and the camshaft lock fits between the sprockets of the camshaft, keeping it from moving. It has a camshaft locating kit to help you find the top dead center (TDC) camshaft position. This kit also comes with a BMW 115-381 gauge, BMW 115-382 gauge, timing socket and a timing pin, and this kit is designed for valve timings with the variable Nockenwellensteuerung (VANOS) timing technology, which was created by BMW. The S85 Camshaft Alignment Tool Kit is compatible with S85, S50B30, S54 and S50B32 engines. All of these tools are kept within a carrying case.
GM
The Ellient Tools Diesel Setting/Locking Tool Kit is a set of tools that you need to hold the camshaft in place and lock the flywheel. The flywheel stores rotational energy, and it will fight against rotational speed. This kit also comes with a tensioner lock pin, which helps ensure that the timing belt is set to the proper tension. The Ellient Tools Diesel Setting/Locking Tool Kit comes with its own carrying case, which is made of plastic. This kit is for General Motor (GM) 1.3 Clean Diesel Technologies Inc (CDTi) diesel engines.
Audi
The Camshaft Locking Tool by Assenmacher Specialty Tools, Inc., is for Volkswagen and Audi 2.0 Liter Turbo engines, and this tool is made of a solid piece of metal with two spokes. These spokes insert in to the sprockets and holds them in place. Use this tool in conjunction with Camshaft Adjuster Socket, Timing Belt Spanner Wrench and Tensioner Locking Pins when adjusting the timing belt.
Lisle
The Lisle LIS36880 Dual Overhead Cam Lock Tool is a universal tool that works with any engine that uses a dual overhead camshaft. This tool features two large, rectangular blocks at the end of a central shaft, and the blocks fit into the camshaft sprockets. Use this tool when changing the timing belt or chain.
Wednesday, January 22, 2014
Which Tools Are for a Budding Mechanic
Mechanics begin by their careers by learning basic car repairs and routine maintenance. Changing tires, changing oil and completing tuneups are typically the first tasks they take on. A mechanic is expected to have his own set of tools. Start your automotive mechanic tool collection with the basics.
Wrenches
Wrenches are needed for almost all types of car repairs and maintenance. You should have a set of box wrenches, a set of socket wrenches in both fractional and metric measurements and an oil filter wrench.
Car Jack
You will need a car jack, jack stands or a set of ramps for changing tires, working on mufflers, changing brakes or any repair that requires access to the underside of a vehicle. Always make sure that the vehicle is secure before you begin any repairs.
Screwdrivers
A mechanic should have a complete set of Phillips and flat head screwdrivers in various sizes. Screwdrivers are used to remove parts of a vehicle when completing a repair.
Vice Grips
Vice grips can be used to loosen, tighten and remove vehicle parts. A mechanic should have a pair with a flat head and a pair with a curved head.
Saturday, January 18, 2014
Special Chrysler Tools
The Chrysler line of cars, and the company that makes them, was named for Walter Chrysler, who introduced the first Chrysler automobile in 1924. In its long history, Chrysler has produced millions of cars, trucks and vans, and several companies manufacture tools designed especially for Chrysler parts and products. The American automaker headquartered near Detroit was ranked the worlds thirteenth largest vehicle manufacturer in 2008, with a revenue of $17.7 million.
Axle Seal Installer
The Miller Special Tools Company manufactures and sells the Axle Seal Installer Chrysler Dana MLR-5041. The installer is used with the 5041 Seal Installer and 8417 Adapter. The tools are used to install the right and left inner seals into the axle tubes in Chrysler models built from 2000 through 2002. The models are built with 248FBI axles.
SPX Miller Special Tools, a 95-year manufacturer of automotive parts as of 2011, is the primary supplier of specialty tools to Chrysler LLC.
Oil Filter Wrench
Assenmacher makes an Oil Filter Wrench M0284 for use on Chryslers. The wrench is also compatible with 2007 Sprinter, Mercedes and Jeep vehicles with V6 diesel engines. The wrench is 84 mm with 14 flats, and 22 mm hexagonal end.
Assenmacher, an independent company based in Boulder, Colorado, sells specialty tool for Chrysler, as well as Toyota, and several other domestic, European and Asian manufacturers.
Ball Joint Separator
Miller Special Tools also manufactures the Ball Joint Separator 9282, item number MLR-9282, for Chrysler vehicles. The tool is used to separate the ball joint from the knuckle on the Dodge Sprinter.
Belt Tension Gauge
The Owatonna Tool Company makes the Belt Tension Gauge C-4188 for Chrysler vehicles. The gauge is used to test tension on timing and fan belts, and to accurately calibrate the belts. The gauge measures tension in units of newtons and pounds, from 30 pounds to 180 pounds (130 to 800 newtons). The company also makes the gauge for Ford, Rotunda, Hummer and General Motors. The Owatonna Tool Company, formed in 1925, is based in Owatonna, Minnesota, and is best known for its pullers and presses.
Belt Tension Socket Wrench
Kent-Moore builds a Belt Tension Socket Wrench for Chrysler vehicles. The wrench, part number 09244-28100, also works with the 1991 to 1995 Elantra, the 1991 to 1998 Sonata, the 2000 and newer XG300 and XG350, and the 2001 and newer Santa Fe. Kent-Moore is part of SPX Service Solutions, and manufactures tools for service professionals.
Tuesday, December 24, 2013
High Impact Air Gun Tools
Pneumatic tools offer reliability and strength. An air gun uses very few moving parts. Air pressure moves pistons that generate the power. The only maintenance needed on an air gun, or pneumatic tool, is daily oiling if the tool is not self-oiling. The main goal of an air gun is to deliver a powerful tool capable of intense amounts of torque or pressure. The most common high-impact air tools are air hammers, air drills and impact wrenches.
Air Hammers
An air hammer is not an elegant tool. It is used to repeatedly deliver blows to an object. The hammer comes with a variety of tips to shape or smooth metals. An internal piston is actuated by the air pressure from an air compressor. The piston repeatedly shoots forward and back. The different tips determine what the movement accomplishes. A flat-head hammer tip allows a worker to create a curve in a piece of sheet metal. The flat-head condenses and spreads out the metal as the piston hammers the ball into the surface of the metal. Chisel tips can be used to chip away at brick or stone, or to gouge metal.
Air Drills
Air drills use air pressure to generate high levels of rotation comparable to battery-operated drills. The tool is weaker than the electrical variation but is less likely to break down due to the limited number of moving parts. The tool delivers steady rotation regardless of the material. Electric drill motors can snag up in tough materials. Air drills are available in a standard gun style, similar to electric, and hand-held variations similar to electric screwdrivers. The tool has a quick-release connection on some models, or the standard chuck-key connection that requires a specific tool to unlock the bit.
Impact Wrenches
Impact wrenches are the most common type of high-impact air guns. An impact wrench combines the elements of an air hammer with an air drill. Rather than just spinning a gear, the tool delivers air pressure to an internal hammer that builds up briefly before spinning the gear. The rapid discharge of stored pressure or energy translates to high-torque rotation. Impact wrenches work best on stubborn or damaged bolts. The manual equivalent to this tool would be to place a wrench on a bolt and hammer at it with a sledge hammer. The tool, like all air guns, is reliable with minimal moving parts. The only maintenance necessary is to oil the tool daily. The oil prevents the internal pistons and gears from becoming sticky or dry.
Saturday, December 21, 2013
Tools for Carburetor Fuel Air Mixes
The function of a carburetor is to regulate the engines fuel air mixture. If the mixture is too rich, meaning the air content is too low, increased carbonization of the engine can occur. It can also decrease engine performance and increase the chances of smoking. If the mixture is too lean, or the air content is too high, there is less lubrication to the engine which could cause cylinder scoring. Maintaining the proper fuel air ratio is necessary to avoid these problems. This can be done by adjusting the fuel air mix. For most carburetor models, special tools are required to adjust the carburetor. These tools adjust carburetor-specific screws which are now used on most models to prevent adjustment by non-EPA-certified mechanics. Five different carburetor adjustment tools are currently on the market.
Single "D"-shaped Tool
The single "D"-shaped carburetor adjustment tool is used to adjust the tamper-proof adjustment screw found on some carburetor models. Both the tool and the tamper-proof adjustment screw are "D"-shaped. The adjustment of the screw changes the amount of air that is allowed into the engine. By turning the screw in, the amount of air allowed into the engine is reduced, creating a rich fuel air mixture. By turning the screw out, the amount of air allowed into the engine is increased, creating a lean fuel air mixture.
Double "D"-shaped Tool
The double "D"-shaped carburetor tool is used to adjust the double "D"-shaped tamper proof adjustment screw on small engine carburetors. This is done while the engine is running and has had a chance to warm up. This is because the carburetor settings will change once the engine has warmed up.
Hex-shaped Tool
The hex-shaped carburetor adjustment tool is used to adjust the tamper-proof adjustment screw on both small and large engines. The tamper-proof adjustment screw is generally blocked with a cap by the manufacturer to prevent adjustment of the carburetor by non-licensed professionals. Special tools are required for the removal of the cap. The distribution of the cap removal tools are also regulated by the EPA.
Pac-man-shaped Tool
The pac-man-shaped tool is used for the tamper-proof adjustment screw on some Walbro and Zama carburetor models. These tools are also referred to as V-notch carburetor adjustment tools. They are offered to certified mechanics through MTD distributors.
Splined Tool
The splined carburetor adjustment tool is generally used to adjust the tamper-proof adjustment screw on Poulan and Weedeater carburetors. These tamper-proof adjustment screws have four sets of splines each spaced 90 degrees apart.
Thursday, December 19, 2013
Dent Removal Tools
Paintless dent removal has been practiced by auto professionals for years, and is becoming more widely known outside of the industry, according to MSN Autos. Many dents can even be removed at home with a variety of tools.
Whale Tails
Whale tails are tools that are named for the shape of the tools head. They are very thin and may be slid into tight places, such as between door braces. These tools can get around common features such as a trusion bar, which protects drivers in case of an accident, to pound out dents from inside the car door.
Door Hooks
A door hook is another tool that can easily be slipped into tight spaces to pound out dents. These tools can easily repair dents close to the edge of a sunroof or at the top of the car door. They are made both for right- and left-handed people.
Lights and Reflectors
Optimum visibility is a must when repairing dents in cars. Lights and reflectors may require some teaching in order to use them properly, but after that, they are a tremendous help in lighting an area well enough to see effectively while removing dents.
Monday, December 9, 2013
Autobody Tools
Anyone considering autobody work for personal vehicles or as a way of starting a business should to be familiar with the tools of the trade. Several companies offer all-inclusive sets for specific needs that make it easier to amass the necessary items in one step. If you have no professional auto body experience, always consult an autobody professional for advice and tips to do the job properly.
Badger Pro Air Brush Kit
The Badger Pro Air Brush Kit puts several items together with a dual-action air brush for painting, which is the important final step to any auto body repair. A 3/4-ounce jar with cap as well as a two-ounce jar and cover are part of the kit. Other pieces include a 1.4 ounce color cup, an 8-foot braided air hose, a 1/4-inch pipe thread fitting, a head wrench and an airbrush hanger. The entire set of items comes in a deluxe wooden case. An instruction booklet provide details about usage of the kits products.
Dominator II Deluxe Dent Removal System
The Dominator II Deluxe Dent Removal System has seven interchangeable tapping heads that range from most aggressive for thick metal to least aggressive for thin metal. The heads spin at 20,000 rotations per minute and taps the metal underneath the dent, then moves the metal into place without paint removal. Large and medium pneumatic suction heads are for larger problems. Ear protection accompanies any system sold.
Millermatic 140 Weld
The Millermatic 140 Weld can be of use when joining together jagged or open surfaces of a cars body. The M-10 Miller MIG gun features a factory-installed gas solenoid valve and AR/CO2 mix regulator/flow gauge in addition to the 10-foot work cable with clamp. The power cord reaches 6 feet. Contact tips for .024-inch wire and two contact tips for .030-inch wire are included, as is a dual-groove quick-change drive roll for .024-inch wire or .030/.035-inch wire. A single spool of Hobart brand .030-inch solid wire is provided. A set-up and operation video instructs in the proper use of all items, and an information/settings chart helps with quick reference.
National Detroit Disk Sander
A National Detroit disk sander helps smooth out any rough surfaces. The 8-inch gear-driven pad operates on surfaces with positive rotation and an oscillating action. Swift stock removal allows the user total control while eliminating normal scratch patterns.
Tuesday, November 19, 2013
Cylinder Head Valve Seat Grinding Tools
The cylinder heads in the four-stroke combustion engine have valves and valve seats that must be machined to precise tolerance and fit. If the valves do not seat correctly with their seats, they leak and lose compression. Valves that do not match within specifications with their seats can also cause excessive overheating and valve failure. The valve seat takes a continual pounding from the action of the valve when it closes. Valve seats can crack and become worn. Several tools need to be used to check and repair valve seats.
Crack Checking Tools
Before any valve seat can be reshaped and ground within specifications, the vale seat area must be magnafluxed to reveal hairline cracks. An electrical transformer attaches to the head, where it delivers a a high voltage magnetic charge to the metal. Magnaflux, which consists of a powdered, reactive chemical, gets sprinkled on the valve seat area. The chemical power reacts to breaks in the magnetic lines of force (field), which shows up as horizontal lines or spider-webbing cracks in the metal.
Valve Seat Grinding Machine
The valve seat grinding machine consists of of a platform vice that holds the cylinder head in a fixed and upright position. The vice fasteners lock the head into a level and stable orientation. The overhead part of the valve seat grinder consists of a motor that drives a cutting bit, which can be adapted to cut out the old valve seat from either aluminum or cast iron. A machine bit then cuts the new valve seat face at a precise angle, usually around 45 degrees. Dial indicators determine the depth of the cut, while bits determine the seat diameter to be cut. Lubricant, fed by the machine, keeps the cutting surface cool.
Valve Lappers
Valve lapping tools must be used to attain final sizing of the face and valve seats for a perfect, sealed match. The most common valve lappers consists of wood dowels that have two different size suction cups on each end. After the valve has been inserted in the stem and abrasive compound has been brushed between the valve face and the seat, a manual twisting motion turns the wood dowel back and forth to cut the interface seat between the valve and seat. Valve lappers come in a variety of suction cup diameters for intake and exhaust valves of all sizes.
Motorized Valve Lappers
Instead of manual wood dowel lappers, motorized drills and air guns can be fitted with suction cup bits that attach to the top of the valve. Once abrasive lapping compound has been applied between the valve and seat, the motor or air tool is turned on to spin the valve at high rpm. The use of power tools for lapping reduces the labor time involved in cutting the final seat and valve face.
Valve Seat Grinding Compound
Valve seat grinding compound consists of a a thick paste that contains cutting abrasives. The cutting compound comes in fine, medium and coarse grits. The coarse grit takes the most of the irregularities and burs out of the interface surfaces, while the medium and fine cutting compound cuts the last finishing face between the valve and valve seat.
Sunday, November 17, 2013
Line Boring Cutting Tools
Line boring is the process of enlarging the bore, or inside diameter, of a piece of pipe or other type of substance that has an inside and outside diameter and that is hollow. Line boring is often used with engines, for boring out cylinders to increase the diameter during an engine rebuild or in the manufacture of all kinds of pipes and other cylindrical items. There are a number of different line boring and cutting tools available, and each one has a specific purpose as well as a best use.
Large Boring Machines
Large line boring machines are often used in stationary applications, such as in factories where equipment is produced or rebuilt. These machines are very large and are not portable, but they are very precise, able to bore and hone the interior of a metal surface to within thousandths of an inch of tolerance in order to make sure that machined parts can fit together. These machines often cost tens of thousands of dollars or more and are rarely seen by anyone outside of the machine tool industry.
Carbide Cutting and Boring Tools
Carbide cutting and boring tools are used on large and small boring machines in order to actually do the material removal required for the application in question. Carbide tools are generally harder than steel and may have removable carbide tips that can be replaced when they get dull from repeated use. Carbide cutting and boring tools come in a variety of styles, including bit-type styles that are designed to be used with a drill or drilling machines.
Honing Tools
Honing tools are another component of the line boring and cutting industry. After a hole has been bored out or enlarged using a carbide cutting tool, the surface that has been cut must be honed, or polished, in order to ensure that no burrs or other metal problems remain. Honing tools are made of stones with very fine grit that can be inserted into the hole and spun at high velocity to create a non-directional surface that is smooth as glass and free of scratches or high spots that might damage the machinery.
Saturday, November 2, 2013
Roadside Assistance Tools
When you are driving long distances, it is important to carry roadside assistance tools for use when your car suffers a tire blowout, an overheated radiator or other type of vehicular emergency. Not only do you need a functional flashlight with extra batteries to use during nighttime emergencies, you will also need adjustable wrenches to secure radiator hoses and perform similar auto repairs.
Battery Operated Lantern
In order to repair a cars engine at night or to repair and inflate a spare tire at night, it is essential to carry a battery-operated lantern in your car at all times. Usually containing a six-volt battery that will last up to 22 hours, this roadside assistance tool is equipped with a fixed flood beam so that you can illuminate your car very well. The lantern can also be used to warn oncoming traffic of your roadside emergency situation.
Heavy-Duty Jumper Cables
To help others out with roadside assistance, as well as helping to restart your own car during an emergency, heavy-duty jumper cables are used. Available in 6-gauge and 4-gauge styles, heavy-duty jumper cables are equipped with insulated handles so they can be gripped easily when the copper teeth are fitted over a cars battery terminal. This tool is used to jump-start a car when its battery has completely died.
Roadside Emergency Flares
Measuring just over three inches long and containing a flashing LED light at one end, roadside emergency flares are used to deter oncoming automobiles from coming close to your damaged vehicle. The battery-powered flares magnetic base allows you to easily secure the flare onto your cars trunk, hood or roof so that other drivers can avoid hitting your car while it is being repaired.
Tire Inflator with Gauge
When a car suffers from a tire blowout and the spares air pressure is too low, a tire inflator equipped with a gauge becomes useful. This tool contains a metal pistol grip that shoots air through the attached flexible hose to the tools securing nozzle that fits over your tires air valve. The attached air gauge will indicate how much you need to inflate the tire to reach the proper pressure.
Windshield Cutting Tools
The improper use of tools or lack of experience in removing windshield glass can cause serious damage to a vehicle. Worse yet, there are reports of serious bodily injury caused by people attempting do-it-yourself windshield removal. Specific tools and techniques are needed for proper windshield removal. Windshield removal tools are available in hand-driven and power models in a variety of price ranges.
Cut-Out Wire
Windshield cut-out wire slices through old adhesive sealing compound that holds the window in place. The compound usually is made of urethane or silicone, which can be hard to cut through once it has cured. Cut-out wire is made of stainless-steel and performs like a cutting saw tooth to cut through the seal. The wire goes under the sealing compound around the entire edge of the windshield. Once secured, its lifted out of the vehicle with plastic handles that are attached to the ends of the wire.
Cable Knife
Cable knives use a lever action to quickly remove silicone sealant from around the windshield. Cable-knife blades are convenient because the stainless-steel blades are quickly adjusted or changed as needed without removing screws from the knife. Foam covers are used to protect against scratching and to provide more comfort to the user. This foam is also an important safety feature because it makes for a better grip, which prevents slippage. Blades are available in -inch, 1-inch and 1-inch sizes. Pneumatic knives cut through material at 12,000 strokes per minute with no lubricant for even faster windshield removal.
Extractor Cut-Out Tool
Although the primary use for this tool is the removal of auto glass, its also known to be utilized in other applications such as cutting glazing on commercial glass windows and removing barnacles on the bottoms of boats. The manufacturers of this tool claim that 95 percent of the windshields removed wont get damaged. The motor provides 2,000 strokes per minute and comes in a cordless model.
Tuesday, October 1, 2013
Car Entry Tools
Professional locksmiths and car technicians use car entry tools to access locked cards. Generally, these tools allow technicians to enter vehicles whose owners have lost their keys or locked them inside the car. To obtain many of these tools, you may have to provide some documentation that you are a locksmith, technician or law enforcement professional. All of these tools are designed to open the vehicle without causing damage to it.
Slim Jim Kit
The Economy Slim Jim Kit is a six-piece tool kit that features four different types of slim jims: round, Super, 30-inch and slidel. A slim jim, also known as a lockout tool, fits between a car door window and the weather stripping. You move it back and forth until the device finds the lock rod and catches onto it. You then use this device to flip the lock over, unlocking the door. This tool also comes with a case, which allows you to keep all of your tools in one spot. As of 2010, this tool costs between $49.95 and $59.95. This tool only ships outside the United States to law enforcement officials and licensed locksmiths.
Air Fighter
The Air Fighter Professional tool kit features an inflatable bag, which you slide between the car door and the door frame. This tool allows you to create a wedge between the car door and frame, which gives you enough space to slip your unlocking tool into the space. The kit includes three additional tools, including one that comes in two parts. When you put the two pieces together, you can use this tool to extract a key stuck in the car ignition. Another tool has a four-pronged end, which allows you to manipulate the locking catch. The other tool grabs onto lock catches and door handles. As of 2010, this tool costs between $55 and $65.
Auto Lockout Kit
The Master Auto Lockout Kit costs $139.95 as of 2010, and it comes with 13 pieces. This tool is specifically for car technicians, and you can use it for general-purpose car entry. The kit features latch grabbing tools, reach tools, opening rods, back flip tool and slim jims. These adjustable tools feature rounded ends. The kit also comes with its own carrying case, adding to its portability.
Monday, September 23, 2013
Ford Fuel System Bleeding Tools
Occasionally, Ford car fuel systems get air in the fuel line or fuel injection system and need bleeding. Bleeding the fuel line releases this air and allows the fuel system to work more efficiently. Symptoms of air in the fuel line include missing, knocking and stalling. In some cases the car may not start at all. Tools needed to bleed the fuel line allow you to disconnect the line and get rid of any air that may be there.
KD Tools 3321
The KD Tools 3321 Ford Fuel Line Quick Disconnect is available at auto supply stores for around $12 as of 2010. This tool releases the fuel line locking mechanism on new Ford models and fits 5/16- inch and 3/8-inch fuel lines. The quick disconnect tool allows the fuel filter to be released from the fuel line. Once released, the fuel filter can be removed from the fuel line to expose the line for bleeding.
OTC Injection Diagnostic Kits
OTC Fuel Injection Diagnostic Kits allow users to quickly diagnose pressure problems in a fuel line. These kits fit Ford engines that have a multi-port fuel injection system. The kit includes a bleed valve that allows you to bleed air from the fuel line after testing. The gauge assembly lets you check both fuel pressure and fuel volume in the fuel line.
OTC Gauge and Hose Assembly
The OTC Gauge and Hose Assembly tests fuel injection systems and also features a 6-foot bleed hose. The bleed valve on the hose assembly eliminates air from the fuel injection system and also reduces pressure when disconnecting the hoses. The bleed valve can also be used to check for fuel pump volume.