Tuesday, February 11, 2014
Ford A C Specifications
Since its invention in the 1940s, air conditioning has changed considerably. Now, air conditioning systems are computer controlled, giving the driver unprecedented control over the level of airflow and temperature. The three main components in any air conditioning system are the compressor, the evaporator and the receiver dryer. These three components work in tandem to cool incoming air and filter it into the car. Ford is not alone in using air conditioning in its automobiles, with most of its models coming with air conditioning as standard.
Manual Control
Manual control air conditioning is the standard specification given to most Ford cars. Models such as the Focus come with manual control air conditioning, with the option to upgrade for an additional cost. Manual air conditioning systems require the driver to manually turn them on. A button or a dial on the dashboard usually controls this. The driver can then select the level of blower by turning the fan level up or down. The restriction on a manual system is that the driver has no control over the temperature, having to feel when it is just right. The system is also unable to maintain a pre-programmed ambient temperature and will often require adjusting manually.
Automatic Temperature Control
Using a complicated array of both internal and external sensor, automatic temperature control calculates the current temperature and how to either raise or lower the ambient temperature to the preselected level. The automatic temperature control works with both the heater and air conditioning to maintain the appropriate temperature and prevent humidity levels within the car from causing the windows to fog over. The systems come in two varieties, semi and fully automatic. A semi-automatic system will maintain the temperature set by the driver, while a full-automatic system will do this and also operate other devices such as defrosters, heated seats and more.
Dual Electronic Automatic Temperature Control
DEATC, or Dual Electronic Automatic Temperature Control, is a system that is available in several newer Ford models, often as an optional extra. The system works as an automatic temperature control system, which allows users to select the temperature desired, and the system using advanced sensors throughout the vehicle will ensure that temperature is maintained. Unlike normal automatic temperature control systems, however, the DEATC is capable of maintaining two separate temperature regions, usually the left and right of the car. Other manufacturers use this system but call it climate control.
Monday, February 10, 2014
How to Change the Battery in a 2006 Ninja 636
Motorcycle batteries, unlike car and marine batteries, require routine maintenance. Most motorcycle batteries are vented, meaning battery acid can breathe from a small tube if the battery gets too hot or the bike tips over. When a new battery is required, its best to look for a sealed alternative to the older vented-style battery -- they require less maintenance and typically last longer. Changing the battery should pose few problems, even for the novice motorcycle mechanic.
Instructions
Remove Seat
- 1
Locate the key slot on the side of the bike just below the seat.
2Insert the ignition key and turn it with one hand while lifting up gently on the back of the seat. The seat should lift freely once the key is turned.
3Remove the seat and set it aside, then pull the battery cover to the side to reveal the battery terminals.
4Close the battery pliers around the nut securing the negative (black) battery terminal and turn it counterclockwise until the nut spins freely. Lift the negative battery lead off the terminal and place it to the side. Repeat for the positive terminal. Note: When using metal pliers, make sure the pliers do not come into contact with any other metal parts on the motorcycle. Sparking and battery explosion could occur.
5Lift out the dead battery and discard it according to your trash haulers recommendation. Insert the new battery facing the same direction and reinstall it by following steps 4 and 3 in reverse.
How to Replace the Exhaust on a Jeep Wrangler
You can replace the exhaust system on the Jeep Wrangler in pieces or completely from the engine to the rear of the Jeep. The system uses a header pipe, a catalytic converter, and a muffler and tailpipe assembly. In most cases the muffler and tailpipe assembly is the only section you will replace, unless you are adding a performance system. The entire system bolts together and hangs onto a few rubber hangers for ease of replacement.
Instructions
- 1
Jack up the Jeep and support all four corners by placing jack stands under the frame rails. Get the Jeep high enough to work comfortably under it while still allowing you to reach all the bolts.
2Remove the two rubber hangers that hold the tailpipe assembly behind the axle. They will just pull off the mounts on the frame with a little effort.
3Locate the flange where the muffler and tailpipe assembly joins the catalytic converter. Remove the two bolts, using a wrench or socket and ratchet, and separate the flange. Slide the muffler and tailpipe out from under the Jeep.
4Locate the flange at the front of the catalytic converter, and remove the three bolts in that flange using a wrench or socket and ratchet. Remove the converter from the Jeep by sliding it out of the rubber hanger to the left side of the converter.
5Locate the four studs on the base of the exhaust manifold where the head pipe attaches. Remove the four nuts using a deep socket and ratchet.
6Remove the head pipe by lowering it down from the Jeep. Install the new head pipe by sliding it up into position and installing the four nuts onto the studs. Do not tighten them completely yet.
7Install the new catalytic converter by first sliding the mounting rod into the rubber mount under the Jeep. Align the mounting flange with the one on the head pipe, and loosely install the three mounting bolts.
8Slide the new muffler and tailpipe assembly into position under the Jeep, and slide the two mounting rods into the rubber mounts on the frame rail. Align the mounting flange with the flange at the back of the catalytic converter, and install the two bolts that connect them.
9Start at the head pipe and tighten the bolts, working your way toward the back of the Jeep until all the bolts are tight. Check each location where the pipes join to be sure there are no exhaust leaks.
Sunday, February 9, 2014
How to Install Blow Off Valves
A blow off valve is a device that allows recirculating air to exit the intake/exhaust system on a turbocharged vehicle. Without the blow off valve, air would be forced back into the turbochargers compression wheel when the drivers foot is taken off the accelerator, causing undue stress on the turbos components. This, in turn, slows turbo spool up time. Over time, this could cause the turbo to fail. Installing a blow off valve gives the air a place to go and relieves pressure from the turbos compression wheel during gear shifts (when the drivers foot is off the accelerator).
Instructions
- 1
Open the hood and disconnect the negative cable from the battery terminal. Disconnect the positive cable from the battery terminal.
2Remove the battery.
3Locate the factory recirculating valve. Use your shop manual if you need a visual description for the valve specific to your vehicle. This valve recirculates the intake air to the exhaust. This is the device we want to replace. There will be two hoses connected to vacuum lines. The top vacuum line is connected to the throttle body after the intake. This vacuum pressure is what makes the valve operate.
4Use either a screwdriver or socket wrench (either should work) to remove the screw bolts on the hose clamps.
5Slide the hose clamps out of the way and use the screwdriver to pry both the vacuum lines off.
6Install the new blow off valve. Install the hoses the opposite way of removal.
7Put the batter back in and reconnect the positive cable to the battery first, then the negative cable.
How to Replace a Timing Belt on a 2002 Kia Spectra
Replacing the timing belt on your 2002 Kia Spectra is a task that you must schedule as part of routine maintenance when the car reaches approximately 60,000 miles. It is generally agreed in the auto world that you need a new one about every 60,000 miles since the belt like other moving parts will wear. While it is certainly more complicated than simply replacing a fan belt, its still something that you can do in your driveway and youre much better off to do it as part of your maintenance schedule than it is to have the belt break and leave you stranded on the highway.
Instructions
- 1
Disconnect the negative battery terminal.
2Remove the accessory drive belts using the proper size socket to loosen the alternator and push it toward the engine.
3Remove the alternator using the proper size socket and ratchet.
4Remove the water pump and crankshaft pulleys using the proper size socket and ratchet.
5Remove the timing belt guide plate with a wrench.
6Remove the upper and lower timing belt covers with a socket and ratchet.
7Position the crankshaft so that the notch on it lines up with the timing mark on the engine. If your motor is dirty and grimy, use a grease rag to clean the area so the marks will be visible.
8Remove the timing belt tensioner using a wrench and then take off the timing belt.
9Reinstall the timing belt tensioner using the proper size wrench and then move it to its furthest point and tighten the lock bolt.
10Install the timing belt on the pulleys: crankshaft pulley first, then the idler pulley, exhaust camshaft pulley, intake camshaft pulley, and finally, on the tensioner pulley.
11Loosen the tensioner pulley using a wrench and allow the spring to place the proper tension on the timing belt. Now tighten the tensioner pulley and torque the bolts to 28 to 38 foot-pounds.
12Rotate the crankshaft two turns clockwise using the proper size wrench and make sure that the timing marks still line up properly.
13Reinstall the upper and lower timing belt covers and tighten them using the appropriately sized socket.
14Re-attach the timing belt guide plate using a socket.
15Reinstall the water pump and crankshaft pulleys using the proper size socket and ratchet and make sure they are tight.
16Put the alternator in place and secure it with its bolt loosely.
17Reinstall the accessory belt over all the accessory pulleys.
18Pull the alternator toward the front of the car and tighten it when the accessory belt is drawn tight. Be caul not to make the accessory belt too tight. You should be able to push the belt about a half inch.
19Reconnect the battery cable and start the car to test the installation.
Saturday, February 8, 2014
1990 Mazda Rx7 Airbag Information
The Center for Auto Safety (CAS) has recieved numerous consumer complaints concerning Mazda RX-7 seat belt failure and airbag defects. Seat belts failing to properly restrain passengers have been an issue for Mazda since 1977. In newer Mazdas, airbags have been trouble prone, states Clarence Ditlow of the CAS.
Recalls
The 1990 Mazda RX-7 airbags have never been recalled, according to Consumer Guide. However, Anapol Schwartz attorneys list a recall of 1990 Mazda RX-7 frontal airbags. According to the attorneys, threaded inflator components of the airbags may have been damaged during assembly. This may have allowed airbag components to separate when deploying the air bag. The separation in the faulty airbags allows hot combustion gases to escape into the passenger area, which could result in injuries.
Models
According to Edmunds, both side and curtain airbags come stock in all 1990 Mazda RX-7 models, including the Base, GTU, Turbo, GXL and 2+2 GXL.
Tests
The Mazda RX-7 of 1990 has no safety test information available about the airbags from either the NHTSA or IIHS.
How to Convert From R12 to R134a
Every vehicle manufactured with an air-conditioning system prior to 1994 contains R12 rigerant. Since then, the EPA determined that R12 is harmful to the environment, and the Clean Air Act banned the use of such ozone-depleting substances. A more environmentally conscious alternative is available that requires few new parts and can be completed at home with little professional help. Retrofit your cars R12 system to a more efficient R134a cooling system.
Instructions
- 1
Drive your vehicle to a certified air-conditioning repair shop. Allow a qualified technician to remove all remaining R12 rigerant from your system using a rigerant recovery system. Federal law prohibits the release of this gas into the air.
2Instruct the repair shop to flush the system to remove all traces of mineral oil. This will also remove any solid contaminates from the compressor. Mineral oil is not compatible with R134a PAG (polyalkylene glycol) oil, and mixing them could lead to compressor failure. Another option is to use ester oil, which is compatible with both R12 and R134a rigerants.
3Return home to complete the conversion. Begin by attaching the new adapters to the old valves. There are two valves: the high-pressure valve is the larger one, and the low-pressure valve is the smaller one. The low-pressure valve is on the line that runs from the accumulator to the compressor, and the high-pressure valve is on the line from the compressor to the condenser. The adapters screw onto the existing ports on the old R12 system, and will attach only one way so you cannot screw them onto the wrong valve. Check the repair manual for a diagram if you are unsure of the location of the valves.
4Inspect the valves, hoses and pressure switches for any signs of wear or excessive oil buildup. Replace any parts that leak or show excessive wear so the R134a rigerant will not leak from the same place. R134a has much smaller molecules than R12, so a small R12 leak could be a large R134a leak.
5Check your vehicles repair manual for the exact amount of oil to add to the compressor via the low-pressure fitting to lubricate the system. Use the oil and hose included in the conversion kit.
6Connect the can of R134a to the hose included in the conversion kit. Turn the T-valve directly on top of the can to puncture it, then very slowly turn it the opposite direction to release a small amount of rigerant from the hose. This removes all air from the hose so it will not be trapped in the system.
7Close the T-valve fully and connect the other end of the hose to the low-pressure valve on the line from the accumulator to the compressor. The hose will fit only the low-pressure valve.
8Turn on the vehicle and run the air conditioner at the coldest setting. Hold the can of rigerant upright and open the T-valve to allow the rigerant to go into the air-conditioning system. The compressor may not turn on instantly. There is a cutoff switch to prevent damage from low system pressure. Once enough rigerant fills the system, the compressor will engage.
9Watch the gauge on the hose connected to the can of R134a to add the appropriate amount of rigerant to the system. Overfilling or underfilling may affect the systems cooling ability. Once the system is full, turn the T-valve completely off and remove the other end from the low-pressure fitting.
10Place the plastic caps on the low- and high-pressure fittings and apply the retrofit R134a label in a prominent place to indicate that the vehicle uses R134a rigerant. The caps and label are included in the conversion kit.