Saturday, May 3, 2014
How to Remove the Dash from a Buick Park Avenue
There is no time like the present for replacing that ugly, faded and probably cracked dashboard in your Buick Park Avenue. The good news is that doing so is a fairly easy job. In fact, the only difficulty will involve removing the parts that are designed to prevent dashboard removal. You will need only a couple of tools to complete the job, and before you know it the interior of your Buick Park Avenue will be good as new.
Instructions
- 1
Remove the edges of the trim adjacent to doors and beneath the steering wheel. The trim is what keeps the dash in place and covers all of the wiring. Wedge the flat-head screwdriver under the trim that runs alongside the windshield by the doors and pop the dash loose. Remove these trim pieces and set them aside. Use a Phillips screwdriver to loosen any remaining mounting bolts securing the steering wheel trim.
2Loosen the trim along the edges near the doors and under the steering wheel. Use a flat-head screwdriver to pry under the edges of the trim running down the side of the windshield near the doors and pop the trim loose. Slide the trim pieces out of the car and set aside. Use a Phillips-head screwdriver to remove the five to eight mounting bolts holding the steering wheel trim in place. Pull the trim down and discard it.
3Grab the temperature control knobs with a pliers and give a sharp tug. Use the pliers to pry off the radio knobs as well. If you cant pry the knobs off, turn them counterclockwise, as occasionally the knobs screw into the dash.
Sunday, December 1, 2013
How to Reset the Dash Lights on My 2002 BMW 325
You can reset the dashboard lights on your 02 BMW 325 right from your home garage, saving yourself both money and time. There are various warning lights that can illuminate on the BWMs dashboard such as "Check Engine," "Service Engine," or "SRS" (Supplemental Restraint System for airbag malfunctions.) Once you have your vehicle looked at and repaired by a qualified mechanic, you can reset the lights yourself using an OBD scan tool. This tool can be purchased from your local auto parts retailer.
Instructions
- 1
Find the fuse panel cover on the lower part of the drivers side dashboard. Pull down on it from the top using your fingers to remove it.
2Find a port that is the same size and shape as the OBD scan tools connector end. Plug the scan tool into this port.
3Put the key into the ignition and turn it to the "II" position, taking care not to start the engine. Observe the OBD scan tool and wait for the light on the face plate to stop flashing. Notice the instrument panel of your BMW to make sure the warning lights have shut off.
4Remove the OBD scan tool and put the fuse panel cover back in place.
Tuesday, September 17, 2013
How to Unlock Digital Dash on a Ford Fiesta
The Ford Fiesta is Fords most successful selling car, with over 10 million units sold since its inception in 1976. The vehicle is a subcompact car that found most of its success in the European market. More recent models feature a digital display on the dashboard that allows drivers easy access to information about their vehicles. Setting your display to "Self Diagnostic Mode" provides you with pertinent information about how your Fiesta is running and helps you diagnose problems.
Instructions
- 1
Insert your key into the ignition, but do not turn the car on.
2Hold down the "Trip Meter" reset button as you start your engine. Continue to hold the button for 10 to 20 seconds.
3Release the "Trip Meter" reset button when the word "TEST" flashes on the dash display.
4Press the "Trip Meter" reset button, more quickly this time, to view 17 or more modes regarding the state of your car. Read the digital codes that detail diagnostic information about engine-related issues such as engine coolant, battery voltage, and fuel volume.
5Use these codes to determine what work, if any, your car needs.