Wednesday, January 22, 2014
How to Replace a 95 Accent Hyundai Timing Belt
The Hyundai Accent is a subcompact car in production since 1994. The first generation of the Accent includes the model years 1994 through 1999. These vehicles have several different engine options, with a four-cylinder 1.5-liter engine being the standard. This engine has a single overhead camshaft, requiring a timing belt to synchronize the movement of the camshaft and crankshaft. The timing belt on the 1995 Hyundai Accent requires replacement approximately every 60,000 miles.
Instructions
- 1
Disconnect the negative battery cable with a socket wrench to avoid starting the engine inadvertently. Remove the accessory drive belts, crankshaft pulley and water pump pulley. Disconnect the bolts for the timing belt cover and remove the cover.
2Turn the crankshaft clockwise to align the timing marks. The timing mark on the crankshaft must align with the timing mark on the front of the crankcase and the timing mark on the camshaft must align with the timing mark on the cylinder head.
3Loosen the tensioning and pivot bolts on the timing belt tensioner with a socket wrench. Pull the tensioner towards the water pump as far as possible and tighten the adjusting bolt to hold the tensioner in place. Remove the timing belt from the camshaft and crankshaft sprockets. Disconnect the sprockets for the crankshaft and camshaft. Remove the flange for the crankshaft sprocket.
4Connect the flange and sprocket to the crankshaft with a socket wrench. Tighten the mounting bolts to between 51 and 72 ft. lbs. with a torque wrench. Connect the camshaft sprocket and tighten its mounting bolts to between 47 and 54 ft. lbs. if your vehicle identification number begins with a J. Tighten the mounting bolts for the camshaft sprocket to between 58 and 72 ft. lbs. if your vehicle identification number begins with an E.
5Turn the crankshaft and camshaft clockwise to align their respective timing marks. Place the timing belt onto the crankshaft sprocket and camshaft sprocket in that order. Install the back of the belt over the wheel for the timing belt tensioner. Turn the camshaft sprocket counterclockwise to place tension on the timing belt and align its timing marks.
6Loosen the mounting bolts for the timing belt tensioner with a socket wrench. This step allows the spring on the timing belt tensioner to apply tension to the timing belt. Insure the timing belt engages all of the teeth on the camshaft pulley.
7Tighten the adjusting bolt for the timing belt tensioner to between 15 and 18 foot-pounds with a torque wrench. Tighten the pivot bolt to between 15 and 18 foot-pounds. Turn the crankshaft one complete clockwise to seat the timing belt and align the timing marks. Loosen the attaching bolts on the timing belt tensioner with a socket wrench to allow the tensioner to adjust the tensioner the timing belt. Tighten the adjusting bolts.
8Adjust the tension on the timing belt by pulling the timing belt towards the water pump. The timing belt is at the proper tension if the timing belt teeth come halfway across the the head of the adjusting bolt for the timing belt tensioner.
9Install the timing belt covers, crankshaft pulley, water pump pulley and accessory drive belts with a socket wrench. Attach the cable to the negative battery terminal and check the vehicle for proper operation.
Monday, November 18, 2013
How to Replace the Timing Belt on a 2002 Hyundai Accent 1 6L DOHC
The Accent is a subcompact car that Hyundai began manufacturing in 1994. The 2002 model is a second generation Accent, which includes the 1999 through 2004 models. Hyundai introduced a 4-cylinder, 1.6-liter engine with a double overhead camshaft in 2002. This engine uses a timing belt to drive the camshafts with the crankshaft, allowing the cylinder valves to open and close in the correct sequence. The timing belt in a 2002 Hyundai Accent lasts about 60,000 miles.
Instructions
- 1
Remove any components needed to access the cover for the timing belt. Disconnect the timing belt cover with a socket wrench.
2Rotate the crankshaft clockwise to align the timing marks. The timing mark on the crankshaft sprocket must align with the timing mark on the front of the crankcase. The timing mark on the camshaft sprocket must align with the timing marks on the cap of the camshaft.
3Loosen the tensioning bolt and pivot bolt on the timing belt tensioner with a socket wrench. Pull the tensioner towards the water pump as far as possible and tighten the adjusting bolt to hold the tensioner in place.
4Align the timing marks for the crank shaft sprocket and camshaft sprockets, if necessary. Place the timing belt onto the crankshaft sprocket, camshaft sprocket, and belt tensioner wheel, in that order. Turn the camshaft sprocket counterclockwise to take up the slack in the timing belt. Turn the crankshaft clockwise to align the timing marks once again.
5Loosen the mounting bolts for the timing belt tensioner with a socket wrench to place tension on on the timing belt. Ensure that all of the teeth on the camshaft sprocket engage the timing belt.
6Tighten the adjusting bolt on the timing belt tensioner with a socket wrench. Torque the pivot bolt to between 15 and 18 foot-pounds with a torque wrench. Turn the crankshaft one full turn clockwise to seat the timing belt. Ensure that the timing marks on the crankshaft align once again.
7Loosen the attaching bolts on the timing belt tensioner with a socket wrench to allow the tensioner to position itself. Adjust the tension on the timing belt by turning the tensioner wheel. The timing belt is at the correct tension when you pull the timing belt toward the water pump and the teeth of the timing belt come halfway across the tensioner adjusting bolt.,
8Replace the covers for the timing belt. Install any components you removed in step one to access the timing belt.
