Repair And Fix it

home» 1994 » a » change » fuel » how » injectors » maxima » nissan » on » to » How to Change Fuel Injectors on a 1994 Nissan Maxima

---

How to Change Fuel Injectors on a 1994 Nissan Maxima

The Nissan Maxima is a mid-size car manufactured by Nissan since 1976. The third generation of this vehicle was in production from 1989 to 1994 and represented a major redesign. All versions of the 1994 Nissan Maxima have a 6-cylinder 3.0-liter engine with sequential fuel injection. The fuel injectors are on top of the engine and their replacement also requires you to remove the fuel rails.

Instructions

1

Disconnect the negative battery cable with a socket wrench to prevent the battery from producing sparks. Remove the collector for the intake manifold. Detach the hoses on the fuel pressure regulator and fuel rails.

2

Detach the electrical connectors for the fuel injector and disconnect the mounting bolts for the fuel rail with a socket wrench. Lift the fuel rail assembly from the engine.

3

Remove the retainer screws for the fuel injector with a socket wrench and press the fuel injector from the fuel rail. Discard the O-rings for the fuel injector and apply a thin layer of engine oil to the new O-rings.

4

Install the O-rings to the new fuel injector and press the fuel injector into the fuel rail. Fasten the retainer screws for the fuel injector with a socket wrench.

5

Place the fuel rail assembly onto the engine. Torque the fuel rail mounting bolts to between 6.9 and 8.0 ft. lbs. with a socket wrench, then torque them to between 15 and 20 ft.lbs.

6

Attach the fuel lines to the fuel rail assembly and connect the hoses to the fuel pressure regulator. Connect the electrical connector for the fuel injectors and install the collector for the intake manifold with a socket wrench. Connect the cable to the negative battery terminal. Start the engine and check for fuel leaks.