Friday, June 6, 2014
Torque Converters FAQ
Automotive automatic transmissions use a torque converter to transmit torque between the crankshaft and the transmission input shaft. The torque converter links the crankshaft and transmission to provide fluid coupling and torque multiplication.
What are the Torque Converter Components?
The converters essential components are the impeller, the turbine, the stator and the lock-up clutch. The converter is filled with automatic transmission fluid, which is key to transmitting energy between the engine and transmission while smoothing excessive vibration.
How does a Torque Converter Operate?
The impeller is driven by the engines crankshaft. As it spins, vanes charge the fluid, which in turn drives the turbine. The turbine is mounted on and powers the transmission input shaft. The stator is mounted between the two, altering the flow of the transmission fluid back to the impeller as it comes off of the turbine. This provides a torque multiplication feature, maximizing the amount of power sent to the transmission.
What Does the Lock-Up Clutch do?
The torque converters secondary function is as a lock-up clutch. When the vehicle is cruising at a constant speed, the turbine and the impeller turn at nearly the same speed. The torque multiplication function is no longer applicable, so the lock-up clutch engages to lock the impeller to the turbine. The torque converter then serves as a direct linkage between the engine and the drivetrain.
Friday, March 21, 2014
How to Use a Truecraft Torque Wrench
A Truecraft torque wrench allows you to tighten a bolt to a specific torque value. Most automotive repair jobs require that you secure bolts to a certain torque value, measured in foot-pounds or inch-pounds. Too little torque could cause the bolt to work its way loose, and too much could cause uneven pressure and it could even cause the head of the bolt to snap off.
Instructions
- 1
Grip the metal portion of the Truecraft torque wrench with one hand and grip the handle of the torque wrench with the other.
2Turn the black handle on the torque wrench until it matches up with the specified torque you need to obtain. For example, if your bolt requires 20 foot-pounds of torque, turn the handle until the end of the handle lines up with the line next to 20.
3Push the socket onto the head of the Truecraft torque wrench and then place the socket onto the head of the bolt.
4Tighten the bolt down with the torque wrench with slow smooth strokes. Continue this until the torque wrench clicks one time. You have reached the desired torque on the bolt.
5If you tighten past the first click you will over-torque the bolt. This could cause the bolt to break.
Sunday, December 22, 2013
289 Intake Torque Specs
Correct torque value for the bolts on a vehicle is important for auto safety. A torque value that should be paid particular attention to is that of the intake manifold bolts. The intake manifold bolts must have the correct torque value, as well as be torqued in the proper sequence.
Reasoning
The intake manifold is of manufactured of cast iron, and it is bolted to a cast iron block, so proper torque ensures the casting is not damaged. The proper torque also ensures the intake manifold gasket properly seals, preventing debris from entering the combustion chamber. It also prevents vacuum leaks from forming and causing running issues.
How
Proper torque is achieved with a torque wrench. A torque wrench is very similar to a basic ratchet, but it is able to be set to a certain torque value. When the set torque value is achieved, it emits an audible signal, typically a clicking sound, to alert the user.
Amount
Torque is measured in a value known as foot-pounds, sometimes abbreviated "ft-lb." All 12 of the bolts on the intake manifold of a 289 engine require a final torque value of 25 ft-lb.
Process
You cannot simply tighten the bolts in straight sequence, as the last bolts tightened do not seal as well as the first. There is an alternating pattern to assure the best seal. Starting with the front passengers side bolt and moving clockwise, the torque sequence goes 9-5-1-3-7-11-12-8-4-2-6-10 (see reference for image). The sequence must be performed three times to ensure accuracy.
Wednesday, December 4, 2013
How to Measure Torque Using a Pipe Wrench
Torque is the force exerted on an object that causes he object to turn or twist. It becomes very important in industrial applications to measure this force as a means of evaluating the maximum tolerances of various components such as drive shafts and wheel lug nuts. One simple way of measuring torque involves a pipe wrench fastened to a shaft in conjunction with a spring scale.
Instructions
- 1
Tighten the jaws of a 12-inch pipe wrench around the shaft or pipe on which you wish to measure torque.
2Attach the weight-end hook of a spring scale to the hole in the end of the pipe wrench.
3Pull on the other end of the scale at a right angle to the wrench and the shaft.
4Note the reading on the scale in pounds.
5Multiply this weight value by the length of the wrench (one foot, or 12 inches).
6Express your answer in foot-pounds. If the scale reads 50 pounds, multiply 50 pounds by one foot. Your torque is 50 foot-pounds.
7Express your answer in inch-pounds. If the scale reads 50 pounds, multiply 50 pounds by 12 inches. Your torque is 600 inch-pounds.
Friday, November 1, 2013
How to Calculate the Torque for a Fastener
A fastener that needs to be tightened will require a specific amount of torque. To determine how much torque is needed for a fastener, you will need to perform a calculation based on certain values. This will include the size of the wrench to be used on the fastener and the base newton-meter value. Once all of the values are known, you will use simple math to calculate the amount of torque needed.
Instructions
- 1
Measure the length of the wrench in inches with the tape measure. Make a note of the measurement on a piece of paper.
2Multiply the result by 0.0254, with the calculator, to convert the measurement to meters. Call this number "m."
3Multiply the result (m) by the force that will be applied to the wrench, such as 120 newtons. The equation will look like (M x 120). The result (r) is the amount of newton-meters of force.
4Multiply the result (r) by 0.737562 to convert the newton-meters of torque to pound-feet of force. This is the pound-feet of torque that is required to turn the fastener.
5Repeat this process whenever a different size wrench needs to be used with a particular fastener.
Friday, October 18, 2013
Specs for the Ford Aspire Head Torque
Ford introduced the Aspire in 1993 as a 1994 model. It replaced the Festiva as the companys affordable, compact car. Ford discontinued the Aspire in 1997. The head torque specs were the same for the two-door and four-door trims that year, as both of them came with the same 1.3-liter engine.
Understanding Torque
When using hand tools, torque is basically the same thing as leverage. It is the measurement of force applied to turn or twist an object. Torque is given in distance-and-force measurement. For instance, 10 foot-pounds represents a torque of 10 pounds applied to a lever or tool at a distance of 1 foot from the object being turned. This would equate to applying 10 pounds of pressure while using a wrench that is 1-foot long.
Tightening Sequence
It is important to tighten the bolts on the Aspires cylinder head in the proper sequence. There are two lines of bolts, sequenced 8-4-1-5-9 and 7-3-2-6-10. The bolts must be tightened in sequence from 1 to 10.
Torque Specs
Tighten the bolts in sequence with 35 to 40 foot-pounds of torque. Then tighten the bolts in sequence again, using 56 to 60 foot-pounds of torque.
Thursday, September 26, 2013
The Torque Wrench Wont Go Low Enough
Torque wrenches can be used for all sorts of precise tightness settings, but fine settings require using the right type of wrench. Not every torque wrench will work at very small tightness levels. As a result, the mechanic or repairer needs to obtain the right tool with the correct precision.
Instructions
- 1
Reference your engine or application manual for the assembly being worked on for the correct tightness setting value required. Examine your torque wrench to determine if it is an electronic or ratchet-type torque wrench. Purchase one if you do not have one of either type.
2Position the torque wrench so you can see the measurement settings. Compare the setting to the value needed. Set the ratchet-type wrench to the correct setting and lock it in place with the twist lock at the bottom of the wrench. Use the electronic torque wrench if the value is less than the first setting on a ratchet-type wrench (i.e., you need a finer value than the standard measurements provided).
3Preset the electronic wrench to the value needed. Insert the correct socket at the top of the wrench. Apply the wrench to the nut or bolt needing tightening. Slowly tighten until you hear and feel a click with the ratchet-type wrench or a beep from the electronic wrench. Take the torque wrench off the nut or bolt and move on to the next assembly step.