Pages

Showing posts with label bore. Show all posts
Showing posts with label bore. Show all posts

Wednesday, November 20, 2013

How to Use a Bore Scope for Auto Lockouts

How to Use a Bore Scope for Auto Lockouts

Bore scopes are optical devices comprised of a length of fiber-optic cabling fed into a display screen or lens, allowing the user to feed the thin end of the fiber-optic cable into a difficult-to-reach, tight area, and project the image onto the screen of the device. These devices can be extremely convenient when attempting to open a locked car door. With the scope inserted into the crevice between the car door and window, you can easily identify the lock control components, making opening a locked door a simple task.

Instructions

    1

    Insert a plastic wedge -- available at a home-improvement store -- between the car window and door, creating a gap between them and allowing you to insert your bore scope into the door cavity.

    2

    Insert your bore, or fiber, scope and while looking at the display or through the lens, identify the lock control rod. This will be a rod that connects the internal lock control with the key control mounted on the rear of the keyed door lock cylinder in the car door.

    3

    Insert the Slim Jim unlocking device or wire coat hanger with a bend at the tip. While looking through the bore scope, place the Slim Jim or wire coat hanger hook over the lock control rod and either push down, pull up, or push it sideways to toggle it into the open position.

    4

    Remove the Slim Jim or coat hanger, bore scope and plastic wedge, and open the unlocked car door.

ReadMore

Sunday, October 20, 2013

How to Check a Cylinder Bore

How to Check a Cylinder Bore

Cylinder bores must fall within specific, factory-set tolerances to be considered useable. Check cylinders for visible damage and measure using precision measuring equipment such as micrometers and dial-bore indicators. Measurements taken at specific points of the bore indicate cylinder taper and out-of-round conditions that require machining to correct. Checking a cylinder bore requires knowledge of the proper use of the precision measuring equipment as well as the factory specifications as set by the manufacturer. Disassemble the engine to remove the cylinder head and pistons prior to checking the cylinder bore.

Instructions

    1

    Visually inspect the cylinder for signs of lateral scoring, galling and partial piston seizure.

    2

    Feel the top of the cylinder for a shoulder using your fingernail. The shoulder will form right at the top of the unswept portion of the cylinder bore above where the top compression ring ceases to travel upwards. Hone the cylinder to remove the shoulder, if one is present.

    3

    Install an arbor on the dial-bore indicator so the plunger on the indicator is roughly in the center of its travel when placed within the bore.

    4

    Set an outside micrometer to the small end of the cylinder diameter specification as indicated by the manufacturer. Record the micrometer setting on a piece of paper.

    5

    Place the dial-bore indicator in the micrometer and rotate the bezel on the indicator gauge until the zero aligns with the needle. Remove the indicator from the micrometer.

    6

    Measure the top of the cylinder on the X axis using the dial-bore indicator. Record the number indicated by the gauge and add that number to the micrometer setting number. Record the final sum. Repeat this process on the Y axis at the top of the cylinder. Record the final sum next to the top X axis number.

    7

    Repeat the process in the middle and at the bottom of the bore, pairing the X and Y axis measurements together.

    8

    Compare the X and Y axis number pairs. A difference in the bore diameter within any given pair indicates an out-of-round condition.

    9

    Compare the top, middle and bottom number pairs. A difference in the bore diameter between the position groups indicate a cylinder taper condition.

    10

    Measure the outside diameter of the piston skirt even with, and 90 degrees from, the wrist pin boss area. Compare the piston diameter to the largest and smallest bore diameter to determine the piston-to-cylinder clearance range.

    11

    Compare all measurements to the manufacturers tolerances to determine whether the bore is within service specifications or if machine work is needed.

ReadMore