Repair And Fix it

home» 1996 » 3 » 7 » a » covers » diesel » do » how » i » on » remove » valve » How do I Remove Valve Covers on a 1996 7 3 Diesel

---

How do I Remove Valve Covers on a 1996 7 3 Diesel

The valve covers sit on the top of the cylinder heads, and removing them will allow you access to the valves, springs, rocker arms, and push rods on your 7.3-liter Powerstroke Diesel. The 1996 7.3-liter was an optional engine in the Ford F250 and F350 Super Duty series trucks. The engine is very durable and has a good torque band, allowing it to pull heavy loads with little to no stress to the engine.

Instructions

1

Open the hood of your Ford truck and locate the negative battery cable end on the battery terminal. Loosen the clamp bolt on the battery cable end with a wrench then remove the cable from the battery and move it aside, isolating it from the battery.

2

Locate the retaining bolts along the perimeter of the valve covers on the top of the engine. There are eight of them on each valve cover.

3

Remove the eight retaining bolts, one at a time, with a socket and ratchet. Set the bolts aside as you will need them later.

4

Slide a putty knife or other flat, stiff tool under the edge of the valve cover and pry the cover loose from the head. Lift the valve cover straight off the cylinder head and set it aside. Repeat the process on the second valve cover if you are removing both covers.