Pages

Showing posts with label boots. Show all posts
Showing posts with label boots. Show all posts

Monday, January 13, 2014

How to Replace the Boots on a Honda Civic

The tie-rod ball-joint boot on your Honda Civic is what keeps dust, dirt, and other contaminants out of the inside of the ball joint. This is important, because multipurpose grease for lubrication that needs to be kept free of dust is in the ball joint . However, these boots can become torn, cracked, or develop holes. When this happens, you need to replace the boots on your Honda Civic.

Instructions

    1

    Pull the boot off the tie-rod end. Wipe all of the old grease off of the ball joint with a clean rag.

    2

    Pack fresh, clean multipurpose grease into the lower area of the ball pin.

    3

    Fill the new boot with clean multipurpose grease. Ensure you have grease on the lip of the boot. Ensure no dust, dirt, or foreign matter gets into the grease.

    4

    Replace the new boot using the special tool 07QAD-P0A0100. Make sure there is no gap in the boot installation sections. Check the tapered section of the ball pin for grease, and wipe it away if any is present.

ReadMore

Sunday, December 1, 2013

What Are CV Boots

What Are CV Boots?

A Constant Velocity (CV) boot covers the CV joint, which joins to the CV axle of an automobile. It is found in all front-wheel drive vehicles and many four-wheel drive and rear-wheel drive autos as well. It is a rubber casing filled with grease that protects the joint from outside wear and tear and contains lubricant that reduces friction on the joint and prevents friction-related damage in the axles function.

Purpose

    The CV boots cover the CV joints in an automobile. There are four of them on two-wheel drive vehicles and eight on four-wheel drive vehicles. They protect the CV joints both from friction-related damage and from external wear. This keeps the axle and steering capabilities of the car functional. The importance of the CV assembly is that it enables torque to be transmitted at a constant speed from the driveshaft to the turning wheels, while accommodating the vertical movement of the suspension.

Location

    On automobiles that have CV boots, one pair of boots is located on either side of the vehicle along the drive shaft. The outer CV boots cover the joint between the axle and the wheel. The inner boots cover the joint between the axles and the transmission.

Appearance and Materials

    A CV boot is usually a black rubber casing. It has an accordion-like fold across its surface to allow for the flexing actions of the joint. The overall shape of the boot is conical with the narrow side attached to the axle.

Warnings

    While it is possible to continue to drive a vehicle with a damaged CV boot, it is not advisable. The more damaged the CV boot, the more the potential damage to the CV joint. A damaged CV joint ceases to transfer power to the wheels, which means the car is stuck where its parked until the CV joint is replaced. Replacing the CV boot as soon as it demonstrates risk is a good idea because its far less expensive than replacing the joint.

ReadMore