Tuesday, April 8, 2014
How to Quiet Excess Vibration From Car Exhaust Pipes
The exhaust system in your vehicle is attached at various points along the vehicles frame. The system uses an assortment of clamps and hangers to support the exhaust components, as well as to isolate them from excessive vibration. A failure of any of the clamps or hangers will result in the movement of the exhaust system, which will be felt by the driver as vibration. This can often be heard as buzzing noise from underneath the car.
Instructions
- 1
Lift the vehicle with the jack and place it on the jack stands.
2Inspect the exhaust hangers and clamps. Look for any cracking or looseness.
3Tighten any loose clamps or hangers by turning the mounting bolts clockwise with the wrench.
4Replace any clamps or hangers that appear damaged in any way.
5Raise the vehicle from the jack stands and remove them. Lower the vehicle to the ground.
No comments:
Post a Comment