Repair And Fix it

home» a » an » deere » e » john » on » putting » ring » Putting an E Ring on a John Deere

---

Putting an E Ring on a John Deere

An E-ring, also erred to as an E-clip, is a metal clip that is placed on the two front tires of your john deere tractor or lawnmower. The purpose of the clip is to hold the front wheels to the axel spindles of the tractor. While these will already be on your tractor after purchasing it, you may have to replace a missing E-ring, or replace worn or damaged ones.

Tools

Before you can properly replace an E-ring, you will need both snap ring pliers and a screwdriver to help tighten and secure the E-ring to your John Deere product. In addition, you will need a company-issued plastic cap that will be placed on top of the E-ring to keep it protected from corrosion and other harsh elements. You will also need the actual E-ring.

Replacing a Missing E-Ring

Start by locating the center of the hubcap of the tire you would like to place an E-ring on. There will be a hole where the cap of the ring should be. Use your fingers to place the E-ring snugly into the space that connects the axle spindles to the front wheels of the vehicle. Once it is in place, simply rotate it clockwise until tight. You can use either snap ring pliers or a screwdriver to tighten the ring further. After the ring is tight, place the plastic cap on top of it, locking it into place to prevent wear and tear.

Replacing Old E-Rings

If you are planning on replacing your old E-Rings, you will have to first remove the ones that have either worn out or rusted. After removing the protective plastic cap of an E-ring, grab a pair of snap ring pliers. You will find two groves next to the E-ring. Place the ends of the pliers into these grooves and squeeze to pop the E-Ring out. Proceed as you would for replacing a missing E-ring.

Caution

While replacing an E-ring on your tractor is a relatively simple procedure, it is important to use proper safety precautions while you are working with heavy machinery. Always make sure your John Deere tractor or lawn mower is turned off while working on it. Even though the E-ring is not an electronic or motorized part of the tractor, the machinery can still move unexpectedly, potentially harming you and any one else nearby.